Table of Contents
Advertisement
•
Please do not plug the USB cable in and out of your
phone frequently.
USB-Based Synchronization
1.
Connect your phone with a PC through USB cable
delivered with yourphone.
2.
The USB driver is embedded in your phone, and will be
installed automatically.
•
If the Found new hardware wizard is shown,
select Cancel, this may happen more than once.
•
If asked to restart the PC, select NO.
3.
The PC Options software supplied on your phone will
run automatically. Wait for the dialog box to appear
(this may take up to 30 seconds). Buttons showing File
Transfer, PC Assistant and HUAWEI Mobile Connect
via the phone should be displayed.
4.
Select the PC assistant button, and follow the guide to
complete the PC assistant installation for the first time.
5.
You may be asked to restart the PC. This time, select
Yes.
6.
After restarting the PC, run the PC Assistant software
on your PC. Now you can operate the USB based
synchronization. For details of the operation, refer to
the Help of the PC Assistant.
If the dialog box does not appear in step 3, please
NOTE:
confirm the autoplay function of the PC is activated, and
then reconnect the cable to the phone and then the PC. The
25
USB
Advertisement
Table of Contents
