ACA P37B User Manual

Rugged pda

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

ACA Digital

Oct. ‐2009

(Version: V3.2)

Table of Contents

Summary of Contents for ACA P37B

Page 1 (Version: V3.2) ACA Digital Oct. ‐2009 ...
Page 2 ACA Digital has many years experience in designing computers to meet severe environmental applications. These applications include those found by military as well as industrial users. The P37B has been designed to comply with the relevant requirements of MIL_STD‐810F, MIL‐STD‐461F and IP67. These include EMC, EMI, ...
Page 3 Regulatory Compliance Statements FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAUTION! Exposure to Radio Frequency Radiation. The radiated output power of this device is far below the FCC radio frequency exposure limits. For body worn operation, this device has been tested and meets the FCC RF exposure guidelines for use with an accessory that contains no metal and the positions the handset a minimum of 1.5 cm from the body. Use of other enhancements may not ensure compliance with FCC RF exposure guidelines. Federal Communications Commission Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the distance between the equipment and the receiver. • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. The maximum SAR value reported is 0.231 W/kg. Changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment. ...
Page 4 Safety Use the following safety guidelines to help protect yourself and the P37B. • Do not attempt to service the P37B yourself. Always follow installation instructions closely. • Be sure that nothing rests on the AC adapter's power cable and that the cable is not located where it can be tripped over or stepped on. • Do not cover the AC adapter with papers or other items that will reduce cooling; also, do not use the AC adapter while it is inside a carrying case. • Use only the AC adapter, power cord, and batteries that are approved for use with this P37B. Use of another type of battery or AC adapter may cause risk of fire or explosion. • If you use an extension cable with the AC adapter, ensure that the total ampere rating of the products plugged in to the extension cable does not exceed the ampere rating of the extension cable. • When you move the P37B between environments with very different temperature and/or humidity ranges, condensation may form on or within the P37B. To avoid damaging the P37B, allow sufficient time for the moisture to evaporate before using the P37B. • When you disconnect a cable, pull on its connector or on its strain relief loop, not on the cable itself. As you pull out the connector, keep it evenly aligned to avoid bending any connector pins. Also, before you connect a cable make sure both connectors are correctly oriented and aligned. Battery Safety • There is a risk of explosion if the battery is replaced by an incorrect type. • Dispose of used batteries according to the instructions. • Do not dispose of batteries in a fire. They may explode. Check with local authorities for disposal instructions. Notices This unit is equipped with a battery pack and backup battery. It is possible that the PDA may not power‐on due to battery discharge as a result of storage. Recharge the unit for 3 hours in order to fully charge its battery. The backup battery will recharge from external power when the AC adapter is connected. ...
Page 5 Battery charge notice It is important to consider the environment temperature whenever you are charging the Lithium‐Ion battery pack. The process is most efficient at normal room temperature or slightly cooler. It is essential that you charge batteries within the stated range of 0°C to 50°C. charging batteries outside of the specified range could damage the batteries and shorten their charging life cycle. Storage and safety notice Although charged Lithium‐Ion batteries may be left unused for several months, their capacity may be depleted due to build up of internal resistance. If this happens they will require recharging prior to use. Lithium‐Ion batteries may be stored at temperatures between‐20°C to 50°C, however they may be depleted more rapidly at the high end of this range. It is recommended to store batteries within normal room temperature ranges. ...
Page 6: Table Of Contents
Table of Contents Chapter ONE.........................8 1.1. Introduction........................8 1.1.1. Features..........................8 1.1.2. Package Contents ........................10 1.1.3. Optional Accessories......................10 1.2. Familiarize with the P37B ..................11 1.2.1. Front View ..........................11 1.2.2. Right View ..........................12 1.2.3. Bottom View........................13 1.2.4. Left View ..........................13 1.2.5. Back View...........................14 1.2.6.
Page 7 3.7. Connecting Devices to the P37B................24 3.7.1. Connecting USB .........................24 3.7.2. Connecting a Serial Device....................26 3.7.3. Connection to a LAN ......................26 3.7.4. Connecting Headphones and a Microphone................27 Chapter FOUR ......................28 4.1. Getting Connected...................... 28 4.2. Installing Microsoft ActiveSync................28 4.2.1.
Page 8: Chapter One
Chapter ONE 1.1. Introduction Thank you for purchasing the P37B Rugged PDA. The P37B is an ultra rugged computer designed to military standards. The design incorporates the powerful Intel PXA270 624MHz CPU with Microsoft Windows CE 5.0 operating system. The P37B provides the highest performance and reliability whilst minimizing the Total Cost of Ownership (TCO). The P37B incorporates a transflective LCD with touch‐screen, keypad, WWAN communication capability and ...
Page 9 P37B Rugged PDA Specification Description Items OS Windows CE 5.0 CPU Intel PXA270 624MHz Memory 256MB SDRAM on board 256MB up to 1GB Flash ROM on board Display 3.7” transflective TFT LCD, VGA resolution (640 X 480)/QVGA resolution (320 X 240) Touch screen 4‐wire Resistive touch screen Audio System AC‐97, Internal microphone and one speaker (stereo supported via earphone jack) Application One power on/suspend button Buttons One software reset switch Navigation Key+ Function Key (4 function keys in front) One HW reset key located right side door One Button for backlight on/off (using power on/ suspend button) Communication GSM/GPRS/WCDMA/HSDPA internal module (for data transmission only) GPS & GALILEO receiver module with antenna built‐in(optional) Status Indicator Power LED (two color LED x1) (at right side) LED on the upper side for lighting usage One LED for GPRS (wireless connection) (at left side) I/O Ports ...
Page 10: Package Contents
Certification FCC Accessories 1. Case: standard nylon (waterproof) case with belt loop; 2. Mount: Vehicle mount (using RAM mount) 3. elastic hand strap: prevent accidental drop 4. Stylus with tether kit 5. Power: DC‐Adapter & power cord 12V Vehicle charger with 12V cable (option) 1.1.2. Package Contents The standard P37B includes the following items: P37B PDA unit power cord & Adapter battery stylus & string Hand strap USB connecting cable 1.1.3. Optional Accessories In addition the following optional accessories may be included: • Vehicle Mount ...
Page 11: Familiarize With The P37B
1.2. Familiarize with the P37B The following sections describe the main components and features of the P37B. 1.2.1. Front View Battery Light Power LED LCD Touch Screen Function Keys Navigation Keys Power Button Item Description LCD touch screen Displays the applications and data stored the P37B. It is a touch‐sensitive screen and can be operated using the stylus or finger. Navigation Keys Press these keys to navigate in the P37B interface. Function Keys Programmable keypad interface for controlling the P37B. Power button If the device is off, press this button to turn it on. When the unit is on, press this button for 3 seconds to ...
Page 12: Right View
RJ45 SW Reset Micro SD Slot Earphone Plug Microphone Plug USB mini B Port HW Reset DC IN Item Description RJ45 Port Connects to the LAN. SW Reset Switch Press the end of the stylus into the button to reset the P37B. A reset allows your device to get a fresh start, similar to warm rebooting a computer. Earphone Plug Connects to audio line‐out devices (earphones or headphones) for use in noisy environments. Microphone Plug Enables the recording of voice using an external microphone USB mini type B USB mini type B port (client). port Micro SD Slot Accommodates Micro Secure Digital memory cards. HW Reset Switch ...
Page 13: Bottom View
1.2.3. Bottom View Battery Cover Latch Item Description Battery Cover Unlock the latch to open the battery compartment cover, to Latch place or remove battery. 1.2.4. Left View RS 232 Serial Port USB A Port RS 232 Serial Port Item Description RS 232 Serial Port Connects using a mini 9 way D type connector for this port for serial communications. USB type A port Connects to USB type A port (host) to this port. ...
Page 14: Back View
1.2.5. Back View Stylus Battery Compartment Item Description Stylus Enables you to interact with the operating system. Remove the stylus from the holder and hold and use it the same way you would a pen or pencil. For use with the touch screen.. Battery Houses the removable and rechargeable battery pack. Compartment 1.2.6. Top View SIM Card Slot 15 pin connector Item Description 15pin connector Additional functionality can be provided by using optional Reader Slot cards. SIM Card Slot Additional functionality can be provided by using SIM cards. Only with WAN module included. ...
Page 15: Chapter Two
Chapter TWO 2.1. Getting Started This chapter explains how to install and charge the battery, how to check the battery status, how to turn on the P37B, and how to calibrate the screen. 2.2. Connecting the P37B 2.2.1. Installing the battery This part explains how to install the battery. WARNING! There is a risk of fire and burns if the battery pack is handled improperly. DO NOT disassemble, crush, puncture, short external contacts, or dispose the battery pack in fire or water. DO NOT attempt to open or service the battery pack. Dispose of used batteries according to local recycling guidelines in your area. A backup battery cell is embedded into your device to prevent data loss in instances when the removable battery pack is removed or completely discharged. This backup battery cell will only support the system for a maximum of 10 minutes. First time use, please charge PDA over night (8Hours) to ensure backup battery is fully charged. ...
Page 16 Status Charging Ready Power OFF ．Amber flashing light ．Amber light ．Amber flashing with Power ON ．Amber light Green light 1. Remove the battery compartment cover. 2. Align the battery contacts with the contacts in the compartment and place the battery in the compartment as shown below. 3. Replace the battery compartment cover, and lock the battery latch. ...
Page 17: Charging The Battery
2.2.2. Charging the Battery Before using the P37B for the first time it will need charging for about 4 hours at least. The P37B can be charged using the power adaptor. NOTE: When the battery power is below 10%, the P37B will enter suspend mode. 2.2.3. Charging the Battery with the Adapter Charger 1. Open the side door on the right bottom of the P37B. 2. Plug the adapter charger (B) into the side door (A). 3. Plug the power cord into the AC adapter (C). 4. Plug the AC adapter (D) into an electrical outlet. ...
Page 18: Powering Up For The First Time
2.3. Powering up for the First Time After you have charged the P37B for about 4 hours the device is ready to be used. You can now start up the P37B when you can calibrate the touch screen, practice with the stylus and set the date, time and zone. Turn on your device by pressing the power button on the front panel. 2.4. Calibrating the touch screen The calibration screen automatically appears when the unit is powered on for the first time or after the system is reset. 1. Tap the center cross hair firmly and accurately with the stylus. The cross hair moves to the next location. 2. Follow the cross hair and continue tapping until the screen has been calibrated. 3. After calibration is finished, press the Enter key to save the settings or press Esc to revert to the previous settings. NOTE: To recalibrate the screen at any time, tap Start → Settings→ Control Panel. ...
Page 19: Setting The Time And Date
Then double‐tap Stylus. Tap the Calibration tab, and tap Recalibrate. 2.5. Setting the Time and Date 1. Tap Start→ Settings→ Control Panel. 2. Double‐tap Date/Time. 3. Tap the arrows next to the month to select the correct month. 4. Select a field in the time box and tap the arrows next to the time to change the value of the field. 5. Tap the drop‐down arrow next to Time Zone to select the correct time zone for your area. 6. Check the box next to Automatically adjust... to have the OS automatically uPDAte the time for daylight saving. ...
Page 20: Adjusting The Screen Brightness
7. Tag Apply to save the settings. 2.6. Adjusting the Screen Brightness 1. Tap Start→ Settings→ Control Panel. ...
Page 21: Chapter Three
Chapter THREE 3.1. Using the Hardware 3.2. Keypads and Function Buttons The keypad enables you to both enter information and interact with the P37B operating system. 3.2.1. Entering Characters with the Keypad The operating system has an onscreen keyboard that enables you to enter alphanumeric characters with the stylus. Press the input panel icon in the system tray to view the input panel menu. Tap Keyboard to view the onscreen keyboard. Tap Hide Input Panel to close the keyboard. The keyboard emulates a standard computer keyboard. Tap the onscreen keyboard to enter, edit, and delete text. ...
Page 22: Using The Stylus
3.3. Using the Stylus CAUTION! Never use anything other than the P37B stylus on the screen. Using another object as a stylus could cause permanent damage. You can use your finger to interact with the screen as well. 1. Remove the stylus from its holder. 2. Hold the stylus as you would a pencil. 3. To make a selection from a menu, lightly tap the tip of the stylus on that item. Adjusting the Double-Tap Rate Set the stylus double‐tap rate as follows. 1. Tap Start → Settings→ Control Panel. 2. Double‐tap Stylus. 3. Tap the Double‐Tap tab. 4. Double‐tap on the checkerboard graphic to set your double tap rate. 3.4. Inserting an Micro SD Memory Card The P37B has a SD card slot compatible with a wide range of Micro SD cards, which are primarily used to back up or transfer files and data. The slot also supports SDHC cards. To insert a Micro SD card into the Micro SD slot. 1. Open the right centre door. ...
Page 23: Removing A Storage Card
2. Insert the Micro SD card with the notched corner as oriented as shown below 3 Press the card into the slot. The card is secure when it is flush with the slot. 4. Close and lock the door. 3.5. Removing a Storage Card 1. Open the right centre door. 2. Press the card in and release. The card pops out. 3. Remove the card from the slot. 4. Close and lock the door. 3.6. WWAN SIM Card Set Up 1. Remove the two hand screws on the top of the P37B. 2. Insert the SIM Card into the SIM Card slot as shown. ...
Page 24: Connecting Devices To The P37B
3. Push the card into the slot. The card is secure when it is flush with the slot. Note! The battery must be removed before SIM card can be fitted. 3.7. Connecting Devices to the P37B This section describes how to connect devices to the P37B. Connection can be made directly to the P37B or using the cradle. 3.7.1. Connecting USB The P37B can accommodate both USB Type A and USB mini Type B. Connecting a USB Type A The illustration below shows how to connect a USB type A device to the P37B. The ...
Page 25 Connecting a MINI USB Type B The illustration below shows how to connect a mini USB type B cable to the P37B. The connector is keyed to only go in one way. If it does not go in smoothly, check the orientation and try again. ...
Page 26: Connecting A Serial Device
3.7.2. Connecting a Serial Device Connect a serial device to the P37B to perform serial communications. Please see below illustration 3.7.3. Connection to a LAN The P37B is connected using a RJ‐45 connector. See below: ...
Page 27: Connecting Headphones And A Microphone
3.7.4. Connecting Headphones and a Microphone The P37B utilizes an external microphone and speaker. A headset and microphone can be used in noisy environments. See the illustration above. ...
Page 28: Chapter Four
Chapter FOUR 4.1. Getting Connected 4.2. Installing Microsoft ActiveSync In order to exchange data between your computer and the P37B and install extra applications or utilities to the P37B, Microsoft ActiveSync must be installed on your computer. Connect the P37B to a PC using a USB type B cable. Download the latest version of Microsoft ActiveSync from the Microsoft website. NOTE:If you have a previous version of the Microsoft ActiveSync installed in your computer, uninstall it first before installing the latest version of Microsoft ActiveSync. 4.2.1. Connecting to Your Computer 1. After ActiveSync has been installed, connect the USB B cable to the USB port on your P37B. 2. Plug the other end of the USB cable into a USB port on your computer. 3. Turn the device on. 4. ActiveSync starts automatically and configure the USB port to work with the P37B. The New Partnership setup wizard will automatically start. NOTE:If ActiveSync doesn’t start automatically, click Start → Programs → Microsoft ...
Page 29 ActiveSync. If a message appears indicating that it is unable to detect a connection, click the Cancel button and manually configure the communication settings. 5. Follow the onscreen instructions. 6. When the configuration process is complete, the ActiveSync window appears. 7. Synchronization will be initialized and will take place if you’ve chosen to synchronize periodically or upon connection. 8. ActiveSync detects the P37B and establishes a connection. 9. Click No, and then click Next. ...
Page 30: Connecting Gps
4.3. Connecting GPS To run GPS Demo program, it need to download VisualGPS from internet. Copy this program onto Deskonchip1 to save, and double tag to install VisualGPS as follow instruction. Copy “visualGPSceinstall.CAB” to P37B – Desktop, and execute “visualGPSceinstall.CAB” on desktop. Follow these instructions to set up a GPS connection. 1.From START‐>PROGRAM‐>Utility ‐>“PwrCtrl”, and chose GPS “ON” 2. Tap Start→ Program VisualGPS. ...
Page 31 3. Click COM2. and Baudrate 9600. Then, OPEN GPS to start the “GPS”. 4. When GPS is active, click GPS status to display the satellite status. 5. Allow approximately 60 seconds (very first time) for GPS longitude and latitude display. Note: GPS display approximately time depend on the environment. ...
Page 32: Connecting Wwan
4.4. Connecting WWAN P37B equip WWAN (Wireless Wide Area Network) module as HSDPA 3.5G high speed connection, where supports GSM/GPRS/WCDMA/HSDPA 3.5G and Data transmission only. 1. From START‐>PROGRAM‐>Utility ‐>“PwrCtrl, and chose GPRS “ON” 2. Chose Start Settings Control Panel Network and Dial‐up connections 3. Tap Make New Connection 『Dial‐Up Connection』『HSDPA Siemens HC25』『Configure…』 4. Set『Baud Rate』115200, then chose 『Call Options』to set up APN 5. Input AT Command『+cgdcont=1,”ip”,”internet”』, and 『Phone Number』input 『*99#. Then, CLICK OK. ...
Page 33 6. Click Control Panel then Network and Dial‐upConncetions. 7. Click 『Dial Properties…』 and 『Dialing Patterns…. Then, place “G” into each blank as follow: 8. Connection is successful when the Status screen displays Connected. ...
Page 34: Chapter Five
Chapter FIVE 5.1. Advance Settings 5.2. Checking the Battery Status This section describes how to view the power level for both the main and backup battery and how to set power saving options. To check the main and backup battery status: 1. Open Power Properties. Tap Start → Settings → Control Panel. Then double‐tap Power. The Power screen appears. 2. The battery menu item displays the status of the main and backup batteries. NOTE: It is necessary to charge the battery when the battery charge reaches below 13%. If the battery does not accept a charge, contact Technical Support. 5.3. Optimizing Battery Life You can extend the P37B battery life by doing either of the following: • Change the automatic power settings • Minimize the use of the backlight 5.3.1. Changing the Automatic Power Settings To change the automatic power settings: 1. In the Power Properties screen tap the Schemes tab. 2. Tap the arrow next to the Power Scheme and select Battery Power. 3. Tap the arrows next to the following three power saving scenarios and select the ...
Page 35: Adjusting Backlight Settings
– Switch state to User Idle: P37B enters power saving mode when there is no user input after the selected timeout. The backlight brightness is reduced. The backlight resumes normal brightness when the LCD is Touched. – Switch state to System Idle: P37B enters power saving mode when there is no system activity after the selected timeout. The backlight is turned off. The backlight turns on when the LCD is touched. – Switch state to Suspend: P37B enters suspend mode when there is no user input or system activity after the selected timeout. Time out values range from Never, and 4/5/10/30 minutes. 5.3.2. Adjusting Backlight Settings The power consumption of the LCD backlight may be high, turn off the backlight function if it is not necessary. If a backlight is required, set “automatically turn off the backlight” function. To change backlight settings: 1. Tap Start → Settings → Control Panel. 2. Tap OEMs Utility. 3. Select Display Manager, and tap the arrow next to Dark or drag the slider to the left to reduce the screen brightness. ...
Page 36: Performing A System Reset
5.4. Performing a System Reset You may need to perform a reset if the device freezes (i.e., device no longer responds to the buttons on the screen). A reset allows your device to get a fresh start, similar to rebooting a computer. This will restart your device and adjust memory allocation. All records and entries are retained after a reset. Unsaved data in open programs may in some cases be lost. Performing a Software/Hardware reset 1. Remove the stylus from its holder. 2. Lightly press the tip of the stylus to the reset button located on the P37B. ...
Page 37: Changing The Screen Resolution
5.5. Changing the Screen Resolution It may be necessary to change the screen resolution from VGA to QVGA, or from QVGA to VGA. 1. Start ‐> PROGRAM‐> Utilizes‐> DispSet 2. Wait for the P37B Re‐start. ...
Page 38: Rotate Screen
5.6. Rotate Screen It may be necessary to rotate the screen display from standard throught either 90, 180 or 270 degrees. 1. Start ‐> PROGRAM‐> Utilizes‐> DispSet 2. Select the angle of rotation. ...