Table of Contents
Advertisement
●
6
Position the rotating shaft and the cover and then
fix the rotating blade from the reverse side of the cover.
Rotating Blade
●
7
Fix the body to the container
Line up the position mark on
the cover with the placement
guide on the container.
Set the side locks on both
sides.
●
8
Press the switch and place the Ice Cream Maker in the freezer.
Be sure to check that the indicator lamp is on.
You can not make ice cream while the indicator lamp is off.
Please refer to P.10 "Troubleshooting" and fix.
Press the switch again to stop the operation once the
indicator lamp is lit.
Place the Ice Cream Maker so that the container is flat in the freezer.
Lights up
Slow flash
Quick flash
(light is out after 5 seconds)
Quick flash
(continuous)
Goes off
Do not rotate the rotating blade
by hand with force. It may cause damage to the blade
or motor
Position Mark
Placement Guide
Container
The Indicator lamp identification
Operating normally (stirring for the first 5 seconds,
stopping, and then selectively stirring and stopping
according to the program)
Cooling before finishing
(for approx. 60 minutes of operation)
Abnormal condition (impossible to stir)
Weak batteries
Standby or finished
Cover
Rotating Blade
6
Side Lock
Hide quick links:
Advertisement
Table of Contents
