Setting The Power Supply Frequency - Panasonic SV-AV20A Operating Instructions Manual

Setting the Power Supply
Frequency
Set the power supply frequency before using the SD
Multi AV Device. The power supply frequency is
different depending on the country or region.
Adjustment of the frequency will help reduce the
appearance of horizontal stripes consisting of light
and dark patterns under fluorescent lighting.
1
Set the Power/Mode Switch to [REC].
(l 13)
2
Press the [MENU] Button.
3
Select [INITIAL SETUP] and press the
[1 SET] Button.
4
Set [AC MAINS] to [50Hz] or [60Hz].
ª To Reduce the Appearance of
Horizontal Stripes Consisting of Light
and Dark Patterns
If adjustment of the frequency does not have much
effect on reducing horizontal stripes, operate the SD
Multi AV Device as follows. (for MPEG4 mode and
PICTURE mode)
1
Set the Power/Mode Switch to [REC].
(l 13)
2
Press [ ] for approx. 1 second.
≥The [
] Indication appears when the
horizontal stripes reduction function is activated.
To Release this mode
Press [ ] again.
≥Turning the power off will release this mode.
18
1
PLAY REC
OFF
2
MENU
3
SETUP MENU
QUALITY
FLASH
BEEP SOUND
INITIAL SETUP
DISPLAY SETUP
RETURN
4
INITIAL SETUP
AC MAINS
CLOCK SET
CARD FORMAT
RETURN
1
PLAY REC
OFF
2
FINE
OFF
OFF
MENU EXIT
60Hz
EXIT
MENU