GigaTent Pack 'N' Go PNG001 Owner's Manual

STEP 1:
A.) Confirm product contents by
emptying contents of bag
and confirming all parts are
included and undamaged.
B.) Select a smooth level site and
position Prep Station with legs
on the ground.
STEP 4:
Attach nylon shelf cubby to table
legs.
NOTE: Make certain to insert strap
through metal ring prior to
attaching to table leg. Repeat on all
sides.
For questions, concerns or replacement parts call Gigatent at our Toll Free Number:
877-836-8701 Monday-Thursday 9am-5pm EST, Friday 9am-12pm EST or email us at customerservice@gigatent.com
TO VIEW FULL SELECTION OF OUR PRODUCT LINE, GO TO WWW. GIGATENT.COM

ASSEMBLY INSTRUCTIONS

STEP 2:
Fully extend center section of Prep
Station.
STEP 5:
A.) Insert veneer shelves inside nylon
shelf cubby.
B.) Snap smaller slotted table top in
center section as shown.
C.) Snap larger slotted table top in
center section as shown.
D.) Inset wind guard in notches as shown.
Pack 'N' Go Prep Station
Owner's Manual
Model # PNG001
44" H x 69" W x 18" D
DESCRIPTION
Prep Station
Nylon Shelf Cubby
Veneer Cubby Shelves 2
Attachable Table Tops
Wind Guard
Carry Case
* cooking accessories and food items not included
B.)
Repeat Steps on
this side of table
C.)
A.)
STEP 3:
A.) Swing open left side and right
side tables.
B.) Ensure tables are fully
extended by pushing down on levers.
C.) Fully extend outer table legs by
pushing down on cross bar.
Note: You will hear a click and
metal stopper will lock legs in place.
STEP 6:
When you're finished using the
Prep Station just Pack 'N' Go!
QTY.
1
1
2
1
1