Related Manuals for Challenger CCL110
Summary of Contents for Challenger CCL110
- Page 1 PLATE CLAMPS INSTRUCTION MANUAL Imported exclusively by Pacific Hoists Pty. Ltd. & Pacific Hoists Ltd. In support of cancer charities in Australia & New Zealand Universal Plate Clamp Horizontal Plate Clamp...
- Page 2 www.jbstools.com WWW.PACIFICHOISTS.COM.AU...
- Page 3 Australia & New Zealand. It is important that this manual be kept in a safe place where any operator of the Challenger Plate Clamp can refer to it and understand the operating principles of this device. All users of this Challenger Plate Clamp should read this manual in full and understand the safe operating principles of the device.
-
Page 4: Specifications
SPECIFICATIONS Challenger Universal Plate Clamps HIGHER CAPACITY AVAILABLE UPON REQUEST www.jbstools.com WWW.PACIFICHOISTS.COM.AU... - Page 5 SPECIFICATIONS (CONT.) Challenger Horizontal Plate Clamps...
-
Page 6: General Safety Instructions
It may be necessary to supplement this information for specific applications. SELECTING THE CORRECT PLATE CLAMP Challenger offers two basic types of plate clamps but the facility they offer may vary with make. Universal Plate Clamp – they can be used for either horizontal or vertical plates and to ■... - Page 7 SAFETY INSTRUCTIONS (CONT.) USING THE UNIVERSAL PLATE CLAMP SAFELY Some designs of clamp, particularly those with a moving cam action jaw where the ■ initial grip is provided by a spring, have a minimum load and minimum plate thickness they can safely lift. Wherever possible refer to the manufacturer’s instructions but in the absence of specific guidance the load should not be less 10% of the rated capacity.
- Page 8 SAFETY INSTRUCTIONS (CONT.) USING THE HORIZONTAL PLATE CLAMP SAFELY Always use horizontal plate clamps in pairs with the correct type, size and length sling ■ and reeved in the manner for which they are designed. Some of these clamps are designed to be used with an endless loop of chain whilst others are for use with a two leg sling.
-
Page 9: Service And Maintenance
SERVICE & MAINTENANCE IN-SERVICE INSPECTION Regularly inspect the plate clamp. If any of the following defects are found, refer to a Competent Person:. Wear, damage or distortion to fixed and moving jaws. ■ Frame opening out or cracked. ■ Insecure, worn or bent pins, bolts etc. ■... - Page 10 OPERATING INSTRUCTIONS Commence to open the plate clamp by pulling the latch lever towards the jaw ■ Continue to place the plate clamp securely to the to-be lifted material and make sure that ■ the jaw of the place clamp rests on the material. The plate clamp will close by pulling the latch lever towards to lifting eye.
-
Page 11: Warranty
WARRANTY Pacific Hoists Pty Ltd (ABN 88 000 631 032) warrants that all products distributed by the company are guaranteed against any apparent fault arising from manufacturing defects caused by faulty materials and / or workmanship. Should any part fail due to the above within 24 months, Pacific Hoists Pty Ltd will repair or replace the defective part free of charge. -
Page 12: Inspection Log
02 8825 6900 National Sales & Service P: www.pacifichoists.com.au Thank you for choosing the Challenger brand. Not only are you choosing a quality and reliable brand but you are also helping to support cancer charities in Australia & New Zealand.