Table of Contents
Advertisement
Operating the product
Changing Warning Sound Volume
1.
After switching your machine on,
press Time Delay and P / P+ keys
simultaneously. Keep them pressed until
the countdown 3, 2, 1 is completed on
the display.
2. Press P / P+ key to activate the S:
position on the display.
3. Each pressing on the Time Delay key will
change the warning sound volume as
"S:0" off, "S:1" medium and "S:2" high.
4. Turn off the machine with the On/Off
key to save the changes.
C
Your machine is set to
"S:2" as factory default.
Floor illumination
Warning to show that machine is
in washing phase
(depends on the model)
Your machine reflects a light to the floor
during the washing process. This light turns
off after the washing process is complete.
C
Floor illumination is activated
automatically when the washing
programme starts and remains lit
until the end of the programme.
C
Floor illumination cannot be
cancelled by the user.
Scheduling the washing
time
Time Delay
If an economical electricity tariff is applied
in your region, you can use the Time
Delay function to wash your dishes during
appropriate hours.
32
/44 EN
You can delay the start of the selected
programme until 24 hours.
1.
Press the Time Delay function key after
selecting the washing programme and
other auxiliary functions.
2. Once you press the Time Delay key,
Display Information Line will show
"0:30" and Time Delay indicator will start
flashing.
3. Set the desired time by pressing the
Time Delay key. Time will increase with
increments of 30 minutes up to 6 hours
and after that in 1 hour increments up to
24 hours every time you press the key.
4. Close the door of your machine after
setting the Delayed Start. Once
the delay time is over, the selected
programme will start automatically.
Changing the settings while Time
Delay function is active
While the Time Delay function is activated,
you cannot make changes in the washing
programme, auxiliary functions or the
duration of delay time.
C
Programme and auxiliary
functions cannot be set/
changed after the programme
has started.
To cancel the Time Delay function
Open the door of the product Press and
hold the Programme Selection / Programme
Cancel keys for 3 seconds. After the 3 - 2 - 1
countdown, 0:01 is displayed, close the door
of the product and wait for the draining
process complete. Draining is completed in
2 minutes and the machine gives an audible
warning when it is completed.
Dishwasher / User's Manual
Advertisement
Table of Contents
