Samsung FlexDry DVG55M9600W User Manual page 44

Operations
06 Temp.
07 Time
08 Eco Dry
09 Anti Static
10 Wrinkle Prevent
11 Adjust Time
44 English
FlexDry_DM9600M_DC68-03381H-07_EN.indd 44
Press Temp. to change the temperature of the current cycle.
High: For sturdy cottons or those labeled Tumble Dry.
Medium: For permanent press, synthetics, lightweight cottons, or
items labeled Tumble Dry Medium.
Low: For heat sensitive items labeled Tumble Dry Low or Tumble
Dry Warm.
Extra Low: Provides the lowest heated drying temperature
possible.
Press Time to select a drying time for the selected cycle. This is
available only with TIME DRY, AIR FLUFF, and WRINKLE AWAY.
This button is not available for Sensor Dry cycles because exact
drying times are determined by fluctuating humidity levels.
This function is available with NORMAL and TIME DRY.
With the Eco Dry activated, drying takes a longer time but power
consumption is reduced.
The drying time can be extended by up to 3 times normal
depending on the temperature and load. The Eco Dry function is
enabled by default.
Anti Static reduces static electricity that occurs from clothing
friction. This is done by spraying steam into the drum in a later
stage of the drying cycle.
NOTE
The Anti Static function is only available with NORMAL, HEAVY
DUTY, PERM PRESS, DELICATES, and TIME DRY.
Wrinkle Prevent provides approximately 180 minutes of
intermittent tumbling in unheated air at the end of the cycle to
reduce wrinkling. Press Wrinkle Prevent to activate this feature.
The load is dry and can be removed at any time during the
Wrinkle Prevent cycle.
You can change the set time for the selected cycle. This is
available only with TIME DRY, AIR FLUFF, and WRINKLE AWAY. To
change the cycle time, press Adjust Time
until the desired time is displayed.
or Adjust Time
2019-06-03 2:57:21