Table of Contents
Advertisement
Troubleshooting Guide
Problem
The LCD is dark.
Adjust the brightness. I
The picture is
Some disruption is normal.
disrupted during fast
forward and rewind.
SD moving picture
quality is poor (jittering
or blocky).
No picture on the LCD
Select a picture mode other than "OFF" (no picture). I
Picture from another
Check connections. Q
unit not shown on the
LCD.
Ensure the input setting is correct. Q
Ensure the power of the connected equipment is on.
Picture doesn't appear
Check connections. P
on the television (or
the size of the picture
Check that the television is on.
seems wrong).
Check that the input mode on the television is correct.
Check the settings in "Video—TV Aspect". Q
LCD pixels turn black
The LCD is constructed with precision technology so 99.99 % of the
or radiate different
pixels are active, but of the remaining of 0.01 %, there are pixels that
colors.
may be black or emit light constantly. This phenomenon is not a
malfunction.
[Í] and [CHG] indicators
The [Í] indicator
The unit has malfunctioned. Consult your dealer.
flashes rapidly.
The [Í] indicator
The unit is on and the LCD is closed or the display mode is set to
flashes slowly.
"OFF" (no picture). Turn the unit off when you have finished.
The [CHG] indicator
There is a problem with the battery pack. Turn the unit on and check
flashes rapidly.
the message on the LCD. W
The [CHG] indicator
Battery pack charge is low. The unit will turn off automatically after a
flashes slowly.
few minutes. ;
38
Solution
Displays
On-Screen Menu Icons
Use [3, 4] while the rightmost icon is highlighted to move them
are cut off or are not
down. J
displayed at all.
No On-Screen display.
Go to the Display menu in the SETUP screen, and select "On" for
"On-Screen Messages". O
"Check the disc."
Clean the disc. 9
"X"
You are trying to play incompatible or corrupted data. This data
cannot be played.
"UNPLAYABLE CARD"
The data cannot be played.
"CHECK CARD"
The card cannot be played or the unit failed to read the card.
Try reinserting it. >
"NO FILE"
Data the unit can play is not recorded on the card or you haven't
inserted a card.
"
ERROR 01"
A problem has occurred with the battery pack. Consult your dealer.
"
ERROR 02"
The battery pack has been recharging for 12 hours but has failed to
recharge for some reason. Recharge again.
"
ERROR 03"
You are recharging in a location that is too hot or too cold. Recharge
at normal temperature.
"H ∑∑"
Trouble has occurred. The number appearing after H depends on the
∑∑ stands for a
problem. Turn the unit off and on again. Alternatively, turn the unit off,
number.
disconnect the power source (AC or battery pack) reconnect the
"U11"
power and turn the unit on again.
If the service numbers fail to clear, note the service number and
contact a qualified service person.
Note
The following do not indicate malfunction.
≥Sound from the AC adaptor during recharging.
≥The battery pack warms up after recharging or during use.
Maintenance
∫ To clean this unit, wipe with a
soft, dry cloth.
≥Use eyeglass cleaner to remove stubborn dirt
from the LCD.
≥Never use alcohol, paint thinner or benzine to
clean this unit.
≥Before using chemically treated cloth, read the
instructions that came with the cloth carefully.
∫ Maintenance of the lens
≥Remove dust carefully with an air blower for
camera lenses (optional).
≥Recommended product:
≥≥Lens cleaner kit (SZZP1038C)
≥≥(Available from Panasonic dealers.)
≥Be careful not to touch the lens with your
fingers.
39
Advertisement
Table of Contents
