Warning Plates On The Turbocharger; Fig. 6: Warning Plate Locations - ABB HT605284 Operation Manual

Operation Manual / A150-M56/66/57/67 - A155-M..
2 Safety / 2.6 Warning plates on the turbocharger
Perfect condition
The turbocharger must only be used when it is in a technically flawless condition and oper-
ated in compliance with its intended use.
ABB excludes any liability for damage resulting from unauthorized modifications to the tur-
bocharger or improper operation.
2.6

Warning plates on the turbocharger

Warning plates are affixed at the following locations:
Fig. 6: Warning plate locations
If warning plates are not present in the designated locations or not readable, proceed as fol-
lows:
Order new warning plates from ABB Turbocharging Service Stations.
u
Remove any warning plates that have become unreadable.
u
Clean and degrease the areas designated for the warning plates.
u
Fit new warning plates and remove protective sheets.
u
Turbochargers supplied to the enginebuilder without insulation must be equipped later with
warning plates on the insulation. This is the responsibility of the enginebuilder.
© Copyright 2021 ABB. All rights reserved. HZTL4032_EN Rev.R August 2021