Suggested Mounting Methods - Velex VX505 Instructions Manual

SUGGESTED MOUNTING METHODS

The VX505 can mounted in three different configurations:
1
Flush Mount
The flush mount quick mount
bezel requires no screws
Use cutout dimensions:
3-3/16" W x 1-11/16" H
(82mm x 43mm)
2
Surface Mount
The flush mount bezel has
two recessed screw holes to
facilitate the included two
oval-head screws.
3
HANDLEBAR
MOUNT
Use provided pan-head
screws and stainless steel
clamp, there are three
mounting variations to secure
the stainless steel clamp, try
the best one for your
application, securely tighten
the stainless clamp to fit your
application.
Tips:
To release the VX505 controller from the mounting bezel, insert
a small jewelers screwdriver into the left/right slots of the bezel.
MULTI-FUNCTION
CONTROLLER
UNIT
MULTI-FUNCTION
CONTROLLER
UNIT
MULTI-FUNCTION
CONTROLLER
UNIT
LEFT or
VX502
SRC
CUTOUT
HOLE
HANDLEBAR
CLAMP
RIGHT
VX502
SRC
5