KCodes 6 Series User Manual

KCodes 6 Series USB 2.0 / 3.0 Device Server
Chapter 1 Introduction
Thank you for purchasing 601/601n/611/612/612ac/604n USB Device Server (in the following referred to as
"Server"). This Server is designed to connect your Multifunction Printer, Scanner, Fax, Multifunction Printer,
Hard Drive, iPhone, iPod, USB Digital TV Tuner, Digital Camera, USB Webcam, USB Speaker, USB CD, USB DVD
to your network, allowing all network users' access to these shared USB devices.
1.1 About 6 Models Described in this Manual
This manual provides introductory information as well as detailed instructions on how to set up and
manage 6 Series in various network environments. The following table shows the differences among the
3 models. All 3 models have a 10/100 Mbit/sec LAN port. However, 601 and 601n has only one USB port,
while 604n v2 have four USB ports. Compared with 3 models have an additional wireless module
(802.11b/g/n). Except for the wireless configuration, most configuration and operations are the same for
601 and 601n/ 604n. Similarly, almost all of the configuration and operations are the same for these
models except that only one USB device can be connected to 601/601n while at most four USB devices
can be connected to 604n. Unless explicitly specified, all instructions in the manual apply to 6 Series.
And USB 3.0 models have a 10-BaseT /100BASE-TX /1000Base-T RJ-45, USB 3.0 Hi-Speed Type-A. However,
611 has only one USB port, while both 612 and 612ac have two USB ports.
To fully benefit from this document, you should be familiar with basic networking principles. The
instructions described in this manual are based on the settings in a new Server. To reload the Factory
User's Manual
Model Name LAN
601 Yes
601n Yes
604n Yes
Model Name LAN
611 Yes
612 Yes
612ac Yes
© 2019 KCodes Corporation. All rights reserved. 6 Series User's Manual V1.0
Wireless USB Port 2.0(s)
No 1
Yes 1
Yes 4
Wireless USB Port 3.0(s)
No 1
No 2
Yes 2