Wharfedale Pro EVO SIGNATURE EVO 10 User Manual page 5

Evolution²
20cm
70cm
For best results the speakers should be at
least 10 inches (20cm) in front of a wall
and at least 30 inches (70cm) from any
corner.
If the loudspeakers are placed too close to the walls the bass will increase but may
be boomy and indistinct. If the loudspeakers are placed further away from the
walls, the inward angle may be increased by upto 40%, although this may restrict
the width of the optimum listening position. As personal taste plays a large role,
experiment with different configurations and play a wide range of programme before
finalising the position of your speakers.
Evo SignatureV3A.indd 8-9
Positioning the speakers. Place the speak-
ers so that you are the same distance from
each. The distance between the speakers
should be the same as between you and
the speakers.
Angle speakers inward by 5º to 30º
for a clearer, more tuneful mid range.
8
Evolution² Evolution²
RIGHT
SPEAKER
Single wired a single amplifier, link bars are fitted
RIGHT
SPEAKER
Using separate cables for
treble and bass units in a
Bi-wiring configuration
reduces intermodulation
effects and improves
headroom and clarity. To
Bi-wire, you will need to
install two lengths of twin
core cable between the
amplifier and each loud-
speaker.
Bi-wired – a single amplifier, with separate wires
Unscrew each terminal a
to drive the bass/mid unit and the treble unit.
few turns and remove the
Note that the wiring link bars are removed.
metal straps.
Connect the cables between
the amplifier and the loud-
speakers as indicated and
re-tighten all the terminals
securely.
Note: Some amplifiers have
two pairs of output termi-
nals to facilitate bi-wiring
but this is not essential.
The advantages of bi-wiring
are fully retained if your
Amplifier
amplifier has only one pair
of output terminals per
channel (as in the illustra-
tion).
Amplifier
Bi-amplified – two amplifiers.
One drives each section.
Note that the wiring link bars are removed.
Important Note, please make sure that heavy multi-standard
cables are well connected and clamped. Single loose strands
arcing can cause a noise in the woofers like a faulty speaker.
9
LEFT
SPEAKER
LEFT
SPEAKER
LEFT
SPEAKER
30/09/2008 09:18:13