Salton CST1162 Instruction Booklet page 6

Connecting the Telescopic Pole
1. Connect the Pole Top by sliding it onto the top of the Telescopic Pole.
NOTE: The Pole Top must align correctly with the 2 grooves that run the
length of the Pole.
2. Line up the grooves of the Bottom section of the Telescopic Pole with the
2 tabs inside the Pole Base hole.
3. Tighten coupling by turning it in a clockwise direction until tight
Fabric Brush Attachment
The Fabric Brush attachment is used in conjunction with the Steam Nozzle.
To attach this accessory:
1. Turn the Steamer off and wait until steam is no longer emitted from the
Steam Nozzle. CAUTION: To avoid burns, do not try to install the Fabric
Brush while steam is coming out of the Steam Nozzle.
2. Align the pegs along the back of the Fabric Brush with the holes on
the Steam Nozzle.
3. Push the brush firmly in place.
HOW TO USE
Filling the Water Tank
1. Unplug the Power Cord and turn the Lighted
On/Off Switch to the 'Off' position.
2. Remove the Water Tank, turn it upside down and unscrew the
Valve Cap ( Ill. 7)
3. Fill the Water Tank with cool water and replace
the Valve Cap. NOTE: To prolong the life of your steamer, we
recommend using distilled or de-mineralized water. Do not
substitute another water tank for the one designed for this unit.
A
B C
Ill. 7
Ill. 8
6