GE GSF25XGWBB Owner's Manual And Installation Instructions page 10

About the refrigerator doors.
When the door is only partially open,
it will automatically close.
Beyond this stop the door will
stay open.
7/16" Wrench
Raise
10
Refrigerator Doors
The refrigerator doors may feel different than
the ones you are used to. The special door
opening/closing feature makes sure the
doors close all the way and are securely
sealed.
When opening and closing the door you will
notice a stop position. If the door is opened
past this stop point, the door will remain
open to allow you to load and unload food
more easily. When the door is only partially
open, it will automatically close.
Door Alignment
If doors are uneven, adjust
the refrigerator door.
Using a 7/16" wrench, turn the door
adjusting screw to the right to raise the
door, to the left to lower it. (A nylon plug,
imbedded in the threads of the pin,
prevents the pin from turning unless
a wrench is used.)
The resistance you feel at the stop position
will be reduced as the door is loaded
with food.
After one or two turns of the wrench,
open and close the refrigerator door
and check the alignment at the top
of the doors.