Advertisement
Connect
Green &
Yellow to
Earth (E)
Connect
Blue to
Neutral
(N)
If colours of the wires in the mains lead of this appliance do not
correspond with the coloured marking identifying the terminals in your
plug, proceed as follows:
The wire which is coloured Blue must be connected to the terminal
which is marked with the letter N or coloured Black. The wire which is
coloured Brown must be connected to the terminal which is marked with
the letter L or coloured Red. The wire which is coloured Green and
Yellow must be connected to the terminal which is marked with the letter
E or coloured Green.
Before refitting the plug cover check that there are no cut or stray
strands of wire inside the plug. Use a 13 Amp BS 1362 fuse, only BSI or
ASTA approved fuses should be used. If you are in any way unsure
which plug or fuse to use, always refer to a qualified electrician.
Note: After replacing or changing a fuse on moulded plug which has a
fuse cover, the cover must be refitted to the plug, the appliance must not
be used without a fuse cover.
Brown wire = Live (L)
Blue wire = Neutral (N)
Green and Yellow = Earth (E)
Ensure the outer sheath of the
mains lead is securely held by the
cable clamp
Connect
Brown to
Live (L)
Advertisement
