SLS K2 Getting Started

Getting Started
K2 Dual Core System
What's in the box?
K2 Dual Core Unit
1.
USB 2.0 A Male-Micro B Male Cable : 1meter
2.
HDMI 1.4 Cable Male to Female : 1foot
3.
Antenna
4.
High Quality Velcro
5.
Getting Started with K2DC
6.

Starting K2DC System

Connect Micro USB Cable
1.
and connect the antenna to
K2DC.
Connect USB A type Male end of USB Cable
4.
to 5V 1A DC power supply to switch board
and switch it ON.
http://www.slscorp.com/products/k2-dual-core-system.html
For any support, queries and suggestions, contact us at support@slscorp.com.
Connect Ethernet Cable to
2.
K2DC and another end to
Network Device
(Hub or Switch or Router).
For More information on K2DC usage, visit
Connect HDMI Female to
3.
K2DC and HDMI Male end
to TV or Projector.
Android OS starts booting. After few
5.
seconds, Homepage will appear.