Osd Adjust; Input Select - Visart Technologies 10.4 PORTABLE TV with built-in multimedia Card Player Operation Instructions Manual

BRIGHTNESS reduce/increase the variable
CONTRAST reduce/increase the variable
SHARPNESS reduce/increase the variable
SATURATION reduce/increase the variable
Note: To ease the operation, the second function of multifunction buttons will be used
(up, down, left, right at menu setting)，representing by ： 、 、 、

6.1.2 OSD ADJUST

H-POSITION
V-POSITION
TIMER SET
TIMER SET is to set up the clock's On/Off time. It appears in the upper right corner of the
screen. Timer is in function only "Timer On" is selected. Press
or off. Press or
When timer is on, three selections will be displayed on the screen, including ON (On
Time) 、OFF (Off Time) and TIME(Current Time). Press numbered keys to adjust to the
correct time. If the current time is 13:15:41, press 1, 3, 1, 5, 4, 1 as the arrow flashes.
Confirm it after time adjust.
ON: System is off, internal clock still runs, when it's time to start, system will be
automatically turned on
Off: System is on, when it＇s time to shut down, system will be automatically turned off.
TIME: Current time
When Timer is set to NO , auto-timer is off.
1.Press ENTER / MENU to enter submenu, then press ENTER / MENU to enter OSD
ADJUST (or press
、 to highlight your choice.
2.Press
3.Then press ENTER to highlight, press
options

6.1.3 INPUT SELECT

Operation under highlighting the variable
TIMER SET
RETURN
Move horizontally
Move vertically
Timer function
to switch between ON, OFF, TIME, TIMER ON and TIMER OFF.
)
VIDEO
TV
MEDIA PLAYER
RETURN
HUE
COLOR
TEMPERATURERreduce/increase the variable
RESET
RETURN
OSD-OFF TIME
OSD-TRANSPARENT
RETURN
、 to change settings. Or Press ENTER for
- 12 -
reduce/increase the variable
defaults recall
return to Menu
OSD auto off time setup
OSD Transparency
Return to Menu
or to turn TIMER on