Home Depot TG76M5311C00 Quick Start Manual page 2

S100
Section 3
S100
S50
Section 2
S100
S100
S50
Section 1
S100
S100
Operation
Turning on the tree
NOTE: If some bulbs do not light or flicker, search for any
loose plugs and/or broken, loose, or missing bulbs.
Replace bulbs promptly with the replacement bulbs
provided in order to maintain the performance and life
expectancy of your tree.
Step 1. Connect the light strings of the tree together
and plug the power cord into a wall outlet.
Step 2. If the tree comes with a foot pedal, step on the
On/Off button.
Maintenance
Spare parts
This tree package includes hinge pins, washers, bulbs,
and fuses for any replacement or repair that you need to
perform on your tree. If extra parts are needed, contact
the Customer Service Team at 01 800 004 6633
Repairing Loose Hinges
Step 1. Place the branch into the slot of the bracket
Step 2. Insert a new hinge pin through the holes of the
bracket and secure with a washer.
Use and Care Instructions
1. Before using or reusing, inspect product carefully.
Discard any products that have cut, damaged or
frayed wire insulation or cords, cracks in the
lampholders or enclosures, loose connections, or
exposed copper wire.
2. Before disassembling the tree, unplug the tree and
remove all ornaments and decorations.
3. Gently lift the tree top straight up to remove from the
Do Not Tamper
center section and fold all branches towards the pole.
Internal Parts
4. Repeat this step for the center and bottom tree
sections.
Open the
5. When storing the product, carefully remove the
protective
cover
product from wherever it is placed, including tree,
branches, or bushes, to avoid any
Do Not Tamper
Internal Parts
undue strain or stress on the product
conductors, connections, and wires.
Cover the protective cap on the
Open the
protective
poles to avoid damaging the internal parts.
cover
6. When not in use, store neatly in a cool, dry location
protected from sunlight.
User servicing instructions
Fuse replacement
Insert
a) Grasp plug and remove from the receptacle or other
Green Label
Plug Into Wall
outlet device. Do not unplug by pulling on cord.
Outlet
b)Open fuse cover. Slide open fuse access cover on top
of attachment plug towards blades.
c) Remove fuse carefully.
d)Risk of fire. Power cord
replace fuse only with 5 Amp,
125 Volt.
e) Close fuse cover. Slide closed
the fuse access cover on top of
attachment plug.
f ) Risk of fire.Do not replace attachment plug. Contains
a safety device (fuse) that should not be removed.
Discard product if the attachment plug is damaged.
Troubleshooting
Problem
The tree
does not
light
The appliance is not to be used by persons (including
children) with reduced physical, sensory or metal
capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction
Children should be supervised to ensure that they do
not play with the appliance
Model: TG76M5311C00; 125273
Solution
Ensure that all tree sections are plugged
into each other and that the tree is
plugged into the wall. If your tree came
with a foot pedal, step on the
On/Off button.
Check for blown fuses at the light string
and power cord plugs. Replace as needed
with the replacement fuses provided.
Check for loose, broken, or missing bulbs
and replace as needed with the
replacement bulbs provided
Alexander Tree
SPARE FUSE