Belkin F5D8053E Manual page 47

16030_P75451-A_F5D8053-v3000_N usb ADR_mnl.doc
Page 47 of 57
• Reboot the router.
• Reboot the modem.
If you continue to have issues, please contact Belkin Technical Support.
If you are not using a Belkin Wireless Router, consult that router manufacturer's
user guide.
2. Open your wireless utility software by clicking on the icon in the system tray at
the bottom right-hand corner of the screen. The tray icon should look like this (the
icon may be red or green):
[Keep the same icon]
3. The window that opens should have a list of "Available Networks".
Available networks are wireless networks to which you can connect.
If you are using a Belkin 802.11g (G Plus) Router, or Belkin 802.11g (54g)
Router, "Belkin54g" is the default name.
If you are using a Belkin 802.11b Router, the default name should be "WLAN".
If you are NOT using a Belkin Router, please consult your router manufacturer's
user manual for the default name.
The name of your wireless network appears in "Available Networks".
If the correct network name is listed in the "Available Networks" list, please follow
the steps below to connect wirelessly:
1. Click on the correct network name in the "Available Networks" list.
2. If the network has security (encryption) enabled, you must enter the network
key. Click "Connect". For more information regarding security, see the page
entitled: "Securing your Wi-Fi Network" on page xx of this User Manual.
3. Within a few seconds, the tray icon in the lower right-hand corner of your
screen should turn green, indicating a successful connection to the network.
If you are still unable to access the Internet after connecting to the wireless
network, please contact Belkin Technical Support.
The name of your wireless network DOES NOT appear in the list