Getting Started
Mounting ViewSonic LED TV to the wall
The LED TV can be used in a free standing or wall-mounted position. Before installing the product to the
wall, please consider the following guidelines:
Read the Important Safety Instructions, at the start of this manual.
•
Do not install in a moist or wet environment. This equipment is intended for indoor use.
•
Do not install near heat source, or strong magnetic fields.
•
Use only UL approved wall-mounting brackets to support the LED TV weight.
•
Before attaching the wall mount plate to the back cover, ensure the product is working.
•
If your LED TV is already set up for free-standing operation, you need to first remove the stand before
•
mounting the device to the wall.
To attach the wall-mount bracket to LED TV safely, please use the following guidelines:
Disconnect the power and any other cables that might hinder moving the LED TV.
•
Set the LED TV on a table or work surface, placing the screen face down on a towel or woolen blanket to
•
protect the screen surface from damage while installing plate.
Before installing the LED TV on the wall, ensure you have recorded the product serial number on page (i)
•
of the User Guide, as you will need the serial number to request service should there be a service need.
Install the wall mount plate to the LED TV using screws NO LONGER than 10mm, as longer screws
•
found in universal (non-ViewSonic) wall mount kits may damage the power supply causing the unit to
fail. The wall-mount screw type is M6 x L13 or M6 x L10.
Mount the wall mount bracket to the wall ensuring use of proper screws to support the installation.
•
Ensure there is at least 3 cm of space surrounding any air-vents of your LED TV to allow adequate
cooling during operation.
Hang the LED TV wall mount plate to the wall mount bracket, completing installation.
•
Enjoy your ViewSonic LED TV!
ViewSonic
3
VT3210LED/VT4210LED