Table of Contents
Advertisement
Menus
< DATE/TIME
Displays the current time on the
LCD monitor.
Z
PRESET
Returns all the camera settings
to their default values.
g
BRIGHT
Sets the brightness of the LCD
monitor.
^
DROP DETECTION
Prevents damage to the
HDD by turning off the power
automatically when it is detected
that the camera dropped.
N
FOCUS ASSIST
When this function is used, the
outline of the focused object is
displayed in the selected colour.
]
REMOTE
Turns reception of the operation
signal from the remote control
on/off.
[
DEMO MODE
Introduces special features of
the camera when there is no
operation for about 3 minutes
during recording mode.
\
OPERATION SOUND
Turns the operation sound on/off.
Settings: [ ] = Factory-preset
OFF : The date/time does not appear.
[AUTO] : The date/time appears for approx. 5 seconds in
the following cases.
•
When the power/mode switch is set from OFF to ON
•
When playback starts
ON : The date/time is always displayed.
EXECUTE : Performs this function.
[CANCEL] : Returns to the menu screen without
executing reset.
Adjust the brightness of the display by moving the set
lever to £ / ¤, then press down.
OFF : Disables the function.
[ON] : Activates the function.
To turn the camera on when the drop detection
worked, set the power/mode switch to OFF, and to
ON again.
CAUTION
Setting this function to off increases the risks of damaging
the built-in hard disk if the camera is accidentally dropped.
[BLUE] / RED / GREEN
OFF : The camera does not receive the signal from the
remote control.
[ON] : Enables operation with the remote control.
OFF : Disables the function.
[ON] : Activates the function.
NOTES
•
The demonstration only works when the AC adapter is
connected, not with the battery.
•
If an SD card is in the camera, demonstration will not take
place even if this mode is set to [ON].
OFF : Turns off the operation sound.
[MELODY] : The melody sounds when operations are
performed.
69
Advertisement
Table of Contents
