Advertisement
SOLAR PILING LITE – 8"
MODEL: LL-SPL-8-X-WBA
Silicone Pad
Battery Cover
Cover Screws
5
Use the provided wrench and screws to secure the silicone
pad and battery cover. Fully tighten screws to ensure the
chamber is water proof.
Screwdriver
7
Place light onto piling and mark holes. Drill small pilot holes
in piling with drill bit. Use screwdriver to secure the light to
your piling with mounting screws – Not Included
3.2v LiFePo4
3000mA
Mounting Screws
Wood Piling
PO BOX 414
105 W. Simon St.
Laotto, IN 46763
Top Screws
Top
Seal
Lens
Base
6
Use Provided wrench and top screws to assembly your
light together. NOTE: The seal must be in the correct
position before tightening down the top to the base.
8
Verify that the top screws are tight to provide a good seal
for the lens. Verify that the base of the light is secured to
the piling.
Phone: 260-918-2758
Fax:
260-918-3540
E-mail sales@lakelite.com
Wood Piling
www.lakelite.com
Advertisement
