Table of Contents
Advertisement
Quick Installation
1 Remove two rear panel covers
2 Connect power cord and AC/DC
adapter
3 Connect video cable
Make sure both the LCD display and
computer are turned OFF
Connect the video cable from the LCD
display to the computer
Macintosh users: Models older than G3
require a Macintosh adapter. Attach the
adapter to the computer and plug the video
cable into the adapter. To order a
ViewSonic® Macintosh adapter, contact
ViewSonic Customer Support.
4 Turn ON LCD display and computer
Turn ON the LCD display, then turn ON the
computer.
NOTE: Windows users may receive a
message asking them to install the INF file.
This is on the CD.
5 Insert the ViewSonic Wizard CD into
the computer's CD drive.
Follow the on-screen instructions If your
computer does not have a CD-ROM drive,
see "Customer Support."
(1) Wait for the CD-ROM to auto-start.
NOTE: If the CD-ROM does not auto-start:
double-click on the CD-ROM icon in the
Windows Explorer, then double-click on
viewsonic.exe.
(2) Follow the on-screen instructions.
Computer
power cord
Video(D-sub) IN
6 Audio Installation (optional)
Speakers Connect the audio cable (line
color) to the AUDIO OUT port of your
computer's sound card, then to the LCD
display's AUDIO IN (line color) port (see
illustration below).
7 Windows users: Set the timing mode
(resolution and refresh rate)
Example: 1280 x 768 @ 60 Hz.
For instructions on changing the resolution
and refresh rate, see the graphic card's user
guide.
8.Installation is complete. Enjoy your
new ViewSonic, LCD display.
You can register your product online at the
website for your region. See the Customer
Support table in this guide. (page 32)
Audio Out
DVI
VXP
ViewSonic N1700w
Audio In
Power IN
Rear panel
covers
Power cord and
AC/DC adapter
AC outlet
4
Advertisement
Table of Contents
