FUNCTION OF CONTROL BUTTON
① Programme
• P ress the cycle that corresponds to your desired wash cycle.
② Rinse
• R epeated pressing of the Rinse button will select Extra Hot, Rinse+, Extra Hot & Rinse+.
• I f you select the Extra Hot(
(Eco, Auto, Steam Care, Steam Dual Spray, Steam Power)
• When you select Rinse+(
③ Child Lock (
)
• U sed to lock or unlock the control buttons to prevent all the settings from being changed by a child.
• T o activate or release the Child Lock function, press the Child Lock button for 3 seconds while the dishwasher is
in operation.
• All controls will be disabled except the Child Lock and Power buttons.
• Turning off the dishwasher will not reset the Child Lock function. You must release the Child Lock before you can
operate the dishwasher.
④ Spray
• W ith each press, the level of water jet is changed to Medium(
(Only Steam Care and Steam Dual Spray)
⑤ Half load
• In case of small load, use upper or lower rack only to save energy.
• With each press, select Upper(
• In case you don't select this button, the machine always works vario washing, which operates upper and lower spray
arm alternately.
⑥ Delay Start
• I f you want to delay the start of selected programme, press this button.
• P ressing this button will increase time by 1 hour.
• T he delay start time can be adjusted from 1 hour to 19 hours.
⑦ Power
• F or operating, press this button first for power on.
• A fter operating, this button automatically switches off for safety and energy saving.
• I n case of irregular surge disturbance to the machine, the power may be automatically turned off for safety.
⑧ Beep On/Off
• The dishwasher must be switched on.
• The beep on/off function can be set by pressing the Spray and Delay Start button simultaneously for a few seconds.
)
⑨ Steam(
• T he Steam symbol light will stay on when the Steam course has been selected.
⑩ Indicator
• C hild Lock.
• R efill with special salt.
⑪ Time Left
• B efore starting, the display window shows the running time of the selected programme.
• A fter starting, the display window shows the remaining time.
• I f the dishwasher has a trouble, the trouble type is displayed. (OE, FE, IE, AE, HE, LE, tE, nE)
• I f these error letters are displayed, please refer to the trouble shooting guide page 29 and follow the guide.
⑫ UV
• I f you want to sterilise the dishes, press Half Load and Delay Start button.
• A fter drying cycle, steriliser will be performed by UV lamp.
• A t this time, St code is displayed in display window.
• W hen you open the door of dishwasher, UV lamp is turned off.
※ Don't look at the lamp directly with the naked eye.
) function, the operating temperature will be up to 80℃.
) an additional rinse cycle is added.
) or Lower(
) rack only. (Except Quick & Dry, Steam Power)
• R efill with rinse aid.
• UV
14
), Soft (
) and Strong(
) in a sequence.