Using The Computer - LG L227WSG User Manual

Connecting the Display

Using the Computer

1.
Make sure to turn off the computer and product. Connect the cable as below sketch map
form 1 to
A
Connect Dsub Cable (PC)
B
Connect Dsub Cable (Mac)
Power Cord
For Apple Macintosh use, a separate plug adapter is needed
to change the 15 pin high density (3 row) D-sub VGA
connector on the supplied cable to a 15 pin 2 row connector.
2.
Insert the Cable Deco Cover in the Stand Body in the correct direction.
3.
Press button on the front switch panel to turn the power on.
When monitor power is turned on, the 'Self Image Setting
Function' is executed automatically.
NOTE
' Self Image Setting Function'? This function provides the user with optimal display settings.When the user connects the
monitor for the first time, this function automatically adjusts the display to optimal settings for individual input signals.
'AUTO/SET' Function? When you encounter problems such as blurry screen, blurred letters, screen flicker or tilted screen
while using the device or after changing screen resolution, press the AUTO/SET function button to improve resolution.
2 .
2
Wall-outlet type
Mac adapter
NOTE
This is a simplified representation of the
rear view.
This rear view represents a general
model; your display may differ from the
view as shown.
User must use shielded signal interface
cables (D-sub 15 pin cable, DVI cable)
with ferrite cores to maintain standard
compliance for the product.
1
Signal Cable
Varies according to model.
A6