Page 1
Warranty information contained in this User Guide will describe your limited coverage from ViewSonic Corporation, which is also found on our web site at http:// www.viewsonic.com in English, or in specific languages using the Regional selection box in the upper right corner of our website.
The mark shown to the right is in compliance with the Waste Electrical and Electronic Equipment Directive 2002/96/EC (WEEE). The mark indicates the requirement NOT to dispose the equipment as unsorted municipal waste, but use the return and collection systems according to local law. ViewSonic CD4220...
4. Lead as an allotting element in steel containing up to 0.35% lead by weight, aluminium containing up to 0.4% lead by weight and as a cooper alloy containing up to 4% lead by weight. ViewSonic CD4220 Proposed Maximum Concentration 0.1% 0.1%...
To meet your future needs, and to receive any additional product information as it becomes available, please register your product on the Internet at: www.viewsonic.com. The ViewSonic Wizard CD-ROM also provides an opportunity for you to print the registration form, which you may mail or fax to ViewSonic. Product Name: Model Number:...
Use non-interlaced signals. Do not use primary color blue on a dark background, as it is difficult to see and may produce eye fatigue due to insufficient contrast. ViewSonic CD4220 There are no user serviceable parts inside and opening or...
Video Signal Cable User’s Manual in CD Wizard Wireless Remote Control and AAA Batteries Quick Start Guide (A4) Quick Start Guide CD Wizard ViewSonic CD4220 LCD monitor Video Signal Cable Power cored For North America Remote control & AAA batteries...
“ ” and “ ” and hold down simultaneously for more than 3 seconds. To resume back to user mode, press both of “ ” and “ ” and hold simultaneously for three (3) seconds. ViewSonic CD4220 button to move the...
To input a analog RGB signals from a computer or other RGB equipment. RGB OUT (mini D-Sub 15 pin) To output the signal from RGB 2 IN. DVD/HD IN [Y, Pb/Cb, Pr/Cr] (BNC) Connecting equipment such as a DVD player, HDTV device, or Laser disc player. ViewSonic CD4220...
Note: The “PIP” and “POP” modes do not function when the screen size is “CUSTOM” or “REAL”. ViewSonic CD4220 LEFT button decrease Acts as ( ) button to decrease the adjustment with OSD menu. Small screen which adjusted “PIP” mode moves left.
Do not allow water or other liquid to splash the remote control. If the remote control gets wet, wipe it dry immediately. Avoid exposure to heat and steam. Other than to install the batteries, do not open the remote. ViewSonic CD4220...
5. Switch on the power of all the attached external equipment When connected with a computer, switch on the power of the computer first. 6. Operate the attached external equipment Display the signal on the external equipment you wish. ViewSonic CD4220...
Page 14
Do not place monitor in landscape in any other manner. How to set-up 1. Remove the stands(legs). 2. The “ ” logo should be on the LEFT side when facing the monitor. ViewSonic CD4220 Remove the stands (legs) Clockwise Counterclockwise...
Use M6 mounting screws (having a length 10 mm longer than the thickness of the mounting bracket) and tighten them securely. (Recommended torque: 470 - 635N•cm). ViewSonic recommends using mounting interface that comply with TÜV-GS and/or UL1678 standard in North America.
Do not sleep where the monitor may topple over or fall in case of an earthquake or other disaster. Before moving the monitor, remove the rope that is securing the monitor. Failure to do so may result in injury or breakdown of the monitor. ViewSonic CD4220 * Clamper and Screw is not supply.
Before making connections: First turn off the power of all the attached equipment and make connections. Refer to the user manual included with each separate piece of equipment. Wiring Diagram ViewSonic CD4220 Equipment with Digital interface LCD monitor (second monitor)
The AUDIO IN 1, 2, 3 or HDMI can be used for audio input. For connection, select AUDIO 1, 2, 3 or HDMI from the AUDIO INPUT button. You can select HDMI only when RGB 1 is selected. The AUDIO OUT jack outputs sound from the selected Audio input. ViewSonic CD4220 To audio output To analog RGB output...
The AUDIO IN 1, 2, 3 or HDMI can be used for audio input. For connection, select AUDIO 1, 2 , 3 or HDMI from the AUDIO INPUT button. You can select HDMI only when RGB 1 is selected. The signal input from HDMI connector cannot be output to the RGB OUT connector. ViewSonic CD4220 * Cables are not supply.
The AUDIO IN 2 and 3 (both RCA) can be used for audio input. For connection, select [AUDIO 1], [AUDIO 2], [AUDIO 3] or [HDMI] from the AUDIO INPUT button. You can select HDMI only when RGB 1 is selected. ViewSonic CD4220...
The AUDIO IN 2 and 3 (both RCA) can be used for audio input. For connection, select [AUIDO1], [AUDIO2], [AUDIO3] or [HDMI] from the AUDIO INPUT button. You can select HDMI only when RGB 1 is selected. The AUDIO OUT jack outputs sound from the selected Audio input. ViewSonic CD4220...
Power ON and OFF Modes The LCD monitor power indicator will turn green while powered on or red in off mode. The monitor can be powered on or off using the following three options: ViewSonic CD4220 1. Pressing the Main Power Switch. NOTE:...
CUSTOM (ZOOM): Image can be expanded beyond the active display area. The image which is outside of active dia- play area is not displayed. REAL: Image will be displayed 1 by 1 pixel. ZOOM ZOOM ViewSonic CD4220 To view a video source: CUSTOM REAL DYNAMIC...
←Picture Size mode VIDEO<S>, VIDEO ←Video Input mode ←Input Signal Colour System mode ←Audio input mode ←Picture Size mode PIP or POP ←Main picture Information ←Sub picture Information ←Main picture Information ViewSonic CD4220 CINEMA VIVID SOFT CINEMA VIVID SOFT AUDIO2 AUDIO3 AUDIO2 AUDIO3 buttons together for at least 3 seconds.
Press EXIT button to open Control Main menu. Press Panel button to select. button Screen ViewSonic CD4220 Press ENTER button to Press decide. button to select function, or control which you like. Press ENTER button to decide. Press INPUT button to...
PICTURE RESET Selecting Picture reset allows you to reset all OSD settings about PICTURE setting. Select “Yes” and press “SET” button to restore to factory preset data. Press “EXIT” button to cancel and then return to the previous menu. ViewSonic CD4220...
SCREEN RESET Selecting Screen reset allows you to reset all OSD settings from PICTURE setting. Select “Yes” and press “SET” button to restore the factory preset data. Press “EXIT” button to cancel and then return to the previous menu. ViewSonic CD4220...
AUDIO RESET Selecting Audio reset allows you to reset all OSD settings from AUDIO setting. Select “YES” and press “SET” button to restore the factory preset. Press “EXIT” button to cancel and then return to the previous menu. ViewSonic CD4220...
PIP RESET Selecting PIP Reset allows you to reset all OSD settings from PIP setting. Select “Yes” and press “SET” button to restore the factory preset data. Press “EXIT” button to cancel and then return to the previous menu. ViewSonic CD4220...
Selecting "YES" allows you to reset PICTURE, SCREEN, AUDIO, CONFIGURATION1,2 and ADVANCED OPTION will be back to factory settings (except LANGUAGE, DATE & TIME and SCHEDULE). Select "YES" and press "SET" button to restore the factory preset data. Press "EXIT" button to cancel and return the previous menu. ViewSonic CD4220...
When the OFF TIMER is set, the SCHEDULE settings will be disabled. OSD H POSITION Adjusts the horizontal position of the OSD menu. OSD V POSITION Adjusts the vertical position of the OSD menu. MONITOR INFORMATION Indicates the model and serial number of your monitor. ViewSonic CD4220...
SECONDARY: CD4220 monitors other than the first one multi-connected via RS-232C are designated as SECONDARY. LOCK: Disable the monitor control by infrared wireless remote controller. Keep pressing “DISPLAY” button during 5 sec or more, this setting will return to “NORMAL” ViewSonic CD4220...
Page 33
As with all personal display devices, ViewSonic recommends displaying moving images and using a moving screen saver at regular intervals whenever the screen is idle or turning off the monitor when not in use.
: 450 dots X 338 dots MIDDLE : 675 dots X 450 dots LARGE : 900 dots X 675 dots POP SIZE : 450 dots X 338 dots ViewSonic CD4220 RGB2 DVD/HD VIDEO<S> VIDEO SIDE BY SIDE SIDE BY SIDE ASPECT :Supported...
By pressing and holding down the DISPLAY button on the remote control for 5 seconds or longer, the remote control mode is initialized to NORMAL. ViewSonic CD4220 ID number of the currently viewed monitor Select the ID number of the monitor you want to control using the +/- button on the remote controller.
This LCD monitor can be controlled by connecting a personal computer with a RS-232C terminal. Functions that can be controlled by a personal computer are: Connection LCD Monitor + PC NOTE: We have two kinds of RS-232 protocol including serious connection and no serious connection that can use by user. ViewSonic CD4220...
2. Place monitor on the protective sheet. 3. Remove screws with a screwdriver and place them in a safe place for reuse. Screws * Stand is not supply. (Stand sold as an option accessory) ViewSonic CD4220 Longer portion comes to the front. Stands...
Allows you to use the entire screen area in most resolutions, significantly expanding image size. Wall Mounting Interface: Allows for the monitor to be mounted on a wall or an arm using any third party compliant device. VIEWSONIC recommends using mounting interface that comply with TÜV-GS and/or UL1678 standard in North America.
NOTE: As with all personal display devices, VIEWSONIC recommends displaying moving images and using a moving screen saver at regular intervals whenever the screen is idle or turning off the monitor when not in use.
Complied Regulatory and Guidelines Power Management Plug & Play Accessories Note: Technical specifications are subject to change without notice. ViewSonic CD4220 Analog Input 42" / 106.68 cm 0.681 mm 1366 x 768 dots Over 16 million colors (depending on video card used) 500 cd/m2 (typ.)
Renta y Datos, 29 SUR 721, COL. LA PAZ, 72160 PUEBLA, PUE. Tel: 01.222.891.55.77 CON 10 LINEAS Electroser, Av Reforma No. 403Gx39 y 41, 97000 Mérida, Yucatán. Tel: 01.999.925.19.16 Other places please refer to http://www.viewsonic.com/la/soporte/index.htm#Mexico Latin America (Peru) www.viewsonic.com/la/ Macau www.hk.viewsonic.com...
How long the warranty is effective: ViewSonic LCD displays are warranted for 1 year for all parts including the light source and 1 year for all labor from the date of the first consumer purchase. Who the warranty protects: This warranty is valid only for the first consumer purchaser.
Page 43
Exclusion of damages: ViewSonic's liability is limited to the cost of repair or replacement of the product. ViewSonic shall not be liable for: 1. Damage to other property caused by any defects in the product, damages based upon incon- venience, loss of use of the product, loss of time, loss of profits, loss of business opportu- nity, loss of goodwill, interference with business relationships, or other commercial loss, even if advised of the possibility of such damages.
& accessories. How long the warranty is effective: ViewSonic LCD displays are warranted for 1 year for all parts including the light source and 1 year for all labor from the date of the first consumer purchase.
Page 45
Tel: (52) 999-925-1916 E-Mail: rrrb@sureste.com Tijuana: Av Ferrocarril Sonora #3780 L-C Col 20 de Noviembre Tijuana, Mexico 4.3: ViewSonic Mexico Limited Warranty ViewSonic CD4220 Villahermosa: Compumantenimietnos Garantizados, S.A. de C.V. AV. GREGORIO MENDEZ #1504 COL, FLORIDA C.P. 86040 Tel: 01 (993) 3 52 00 47 / 3522074 / 3 52 20 09 E-Mail: compumantenimientos@prodigy.net.mx...
First release, combine two protocol sets in one document V1.1 Remove section 3.4 11/14/2007 V1.2 Update base on vender confirmation Applicable model CD4620 CD4220 ViewSonic CD4220 Table of Content Changes and additions Tony Kao Tony Kao Tony Kao Jane Chen...
Introduction This document describes the hardware interface spec and software protocols of RS232 interface communication between Viewsonic Commercial Display and PC or other control unit with RS232 protocol. Viewsonic CD4620 and CD4220 contain with 2 set of protocol command Protocol 1, with ID...
Command Type 0x34 0x30 0x32 Example2: Set Brightness as 176 for TV-02 and this command is NOT valid Send (Hex Format) Name Length Command Type ViewSonic CD4220 Command Value1 1 Byte 1 Byte 1 Byte 1 Byte 1 Byte Command...
Page 49
Set Function Length Command Type Power Input Select Contrast Brightness Sharpness Color Tint Bass Treble Balance Picture Size OSD Language ViewSonic CD4220 0x73 0x24 0x31 Command Type 0x2D 0x0D Command Type Command Value1 0x73 0x27 0x30 Command Type 0x2B 0x0D...
Page 50
PIP Mode PIP Sound select PIP position PIP Input Monitor ID Key Pad Remote Control Key Pad Factory reset ViewSonic CD4220 < Chinese 006 : Russian 005 ~120 Sec Set OSD timeout 000 ~ 100 000: OFF 001: ON (mute)
Get-ACK from PC to LCD (ASCII) Name Length Command Byte Count Bytes order LCD Monitor will send “+” (02Bh); “CR” bytes to PC after receiving the command indicating that the communication link is OK ViewSonic CD4220 Value1 Value2 Value3 Value2 Value3 Value4 1 Byte...
PIP CHANGE PICTURE MODE AUDIO INPUT SCREEN SAVER GAMMA SCREEN SAVER BRIGHTNESS DISPLAY AUTO SETUP EXIT ViewSonic CD4220 For example: “+Volume” will not change the volume in the RCU-Code2 RCU-Code2 RCU-Code2 RCU-Code2 Code (HEX) Note, that in this mode the RCU...