Working Position; Blade Function; Whisk Function; Assembling / Dismantling - Robot Coupe 34251A Operating Instructions Manual

INTRODUCTION TO YOUR
NEW POWER MIXER
Robot-Coupe has developed a whole range of
power mixer. Their technical characteristics are
shown in the table below.
Speed Mixer
Models
variation attachment
CMP 250 V.V.
• 250 mm
CMP 300 V.V.
• 300 mm
CMP 350 V.V. • 350 mm
CMP 400 V.V. • 400 mm
CMP 250 Combi • 250 mm
CMP 300 Combi
• 300 mm
These models are working tools that are perfectly
suited to the needs of their users. The mixer func-
tion will allow you to make soups, vegetable purées
and pulps without any problem, while you will find
that the whisk function is ideal for making pancake
batter, mayonnaise, beaten egg whites, chocolate
mousse, butter sauces, whipped cream or smooth
fromage frais.
The whisk attachment is equipped with a metallic
gear box with a plastic body, even more resistant
when processing preparations such as pan cakes.
The variable-speed function will enable you to
adjust the speed to suit each preparation and to
start the processing at a lower speed in order to
reduce splashing.
6
The simple design of these appliances allows the
assembly and dismantling of the moving parts in no
time at all, to ease maintenance and cleaning.
These instructions contain important information
that will enable you to extract the greatest return on
your investment.
We therefore strongly advise you to read
these instructions carefully before using the
Whisk capacity
attachment Litres
appliance.
15
30
45
• ADVICE ON ELECTRICAL CONNECTIONS
73
This class II appliance (double insulation) requires
15
220 mm
a single-phase alternating current but does not
need an earthed socket. The universal-type motor
30
220 mm
is fitted with an interference suppressor.
The power supply must be protected by a differen-
tial circuit breaker and a 10 A fuse.
Check that you have a standard 10/16 A single-
phase socket.
Make sure that the voltage of your power supply
matches that shown on the identification plate of
your appliance.
Robot-Coupe supplies these models with different
types of motors:
The power mixer is supplied with a single-phase
plug connected to a power cord.
SWITCHING ON
THE APPLIANCE
230 V / 50 Hz for power supplies of:
220 to 240 V.
120 V / 60 Hz.
220 V / 60 Hz.
OPERATING THE APPLIANCE
• STARTING AND STOPPING THE POWER MIXER
1. Check that the
control button (CB) is in
the released position.
2. Connect the power
mixer to the power
supply.
3. Insert the foot into
the preparation.
4. Press and hold down
the safety button (SB).
5. Press the control but-
ton (CB), and the power
mixer will start up.
6. Release the safety
button (SB).
7. To stop the power
mixer, release the
control button (CB).
• CONTINUOUS OPERATION
Follow steps 1 to 6 above, then:
7. While the control button (CB) is in the depressed
position, press the locking button (LB)
8. Release the control button (CB).
9. Release the locking button (LB), and the power
mixer will function continuously.
10. To stop the power mixer, press and release the
control button (CB).
• VARIABLE-SPEED OPERATION
Follow steps 1 to 6 above, then:
7. Change the speed of the motor by turning the
variable speed button (VB) towards the maximum or
minimum as required.