AND SECTION 11) DRAWINGS AND SPECIFICATIONS a) GENERAL The TCG-2500 Series Gangway is a manually operated, spring-assisted, articulating gangway that provides safe access to the tops of various types of truck and rail car vehicles of varying heights for operators to safely perform the work required on the vehicles within fall protection enclosures that are typically associated with the gangway.
Page 12
MODIFIED GANGWAY For any TCG-2500 that has been modified, or that includes the addition of ancillary components not otherwise identified above, see project-specific drawings that reflect the modification or addition. c) OPTIONAL TCG TRACK AND CARRIAGE WITH TCG-S910.1 TRACK LOCK MECHANISM TRACK AND CARRIAGE See FIGURE 4-2 and FIGURE 4-3 below.
Page 25
The following procedure applies to all Carbis pneumatically operated and manually operated TCG-1000, TCG-2000, and TCG-2500 Series gangways with single or double foot locks: For safety reasons, make sure the system is properly locked and tagged to prevent inadvertent gangway operation during the foot lock adjustment procedure.
Page 31
The TCG Gangway LRD (Lift Resisting Device) Lever Arm Release Handle instructions contained within this addendum apply to Carbis Manually Operated TCG Gangway Series TCG-1000, TCG-2000, and TCG-2500. The Lift Resisting Device is designed to impede the gangway from being inadvertently or prematurely raised while the top of the vehicle is occupied by operating personnel.