Customizing Tv Setting; Accessing Main Menus; Customizing Settings; Setup Settings - LG 22LN413Y-TD Owner's Manual

38

CUSTOMIZING TV SETTING

Basic image options
Setting
Backlight Adjusts the brightness of the
screen by controlling the LCD
backlight. If you decrease the
brightness level, the screen
becomes darker and the
power consumption will be
reduced without any video
signal loss.
Contrast Increases or decreases the
gradient of the video signal.
You may use Contrast when
the bright part of the picture is
saturated.
Brightness Adjusts the base level of the
signal in the picture.
Sharpness
Adjusts the level of crispness
in the edges between the light
and dark areas of the picture.
The lower the level, the softer
the image.
Colour Adjusts intensity of all colours.
Tint
Adjusts the balance between
red and green levels.
Colour Temperature Choose one of three
automatic colour adjustments.
Set to warm to enhance
hotter colours such as red, or
set to cool to see less intense
colours with more blue.
You can control red, green,
blue to adjust colour details.
Advanced Control Customizes the advanced
options.
Reset Restores the options of each
mode to the factory default.
Advanced image options (depending on model)
description
dynamic Contrast
dynamic Colour
Noise Reduction
Gamma
Black Level
Motion Eye Care
Film Mode
Colour Gamut
Edge Enhancer
Setting description
Adjusts the contrast to keep it
at the best level according to
the brightness of the screen.
The picture is improved by
making bright parts brighter
and dark parts darker.
Adjusts screen colours so
that they look livelier, richer
and clearer. This feature
enhances hue, saturation and
luminance so that red, blue
and green white look more
vivid.
Reduces screen noise without
compromising video quality.
You can adjust brightness of
dark area and middle gray
level area of the picture.
» Low: Make the dark and
middle gray level areas
brighter.
» Medium: Express the
original picture level.
» High: Make the dark and
middle gray level area
darker.
Sets black level of the screen
to proper level. This function
is available in the following
modes: RF, AV or HDMI.
» Low: The reflection of the
screen gets darker.
» High: The reflection of the
screen gets brighter.
Adjusts screen brightness to
prevent eye glare.
Makes video clips recorded in
film look more natural.
This feature operates only in
480i / 576i / 1080i Resolution.
Advanced Control
Maximizes the utilization of
colour to increase colour
quality.
Standard: Displays standard
set of colours.
Wide: Increase number of
colours used.
Shows clearer and distinctive
yet natural edges of the video.