Remote Control - LG 24MT49DT Manual

Connecting to a PC
y Image shown may differ from your TV.
Your TV supports the Plug and Play* feature and has the built-in
speakers with Virtual Surround that reproduces sound clearly with
a rich bass.
* Plug and Play : The function when a PC recognizes a connected
device that users connect to a PC and turn on, without device
configuration or user intervention.
NOTE
y If you want to use HDMI-PC mode, you must set the Input Label
to PC mode.
y The OSD (On Screen Display) is displayed on the screen as shown
below.
» When turning the product on in HDMI input.
» When switching to HDMI input.
Is the input connected to your PC?
Do not show message again
y If you select "YeS" the size and image quality are optimised for
your PC.
y If you select "No" the size and image quality are optimised for the
AV device (DVD player, set-top box).
y If you select "Do not show message again" this message does
not appear until the TV is reset. You can change the set value in
(Home) Inputs
8
YES NO
Input Label.

Remote control

The descriptions in this manual are based on the buttons on the
remote control. Please read this manual carefully and use the TV
correctly.
To replace batteries, open the battery cover, replace batteries
(1.5 V AAA) matching the and
compartment, and close the battery cover. To remove the batteries,
perform the installation actions in reverse.
CAUTION
y Do not mix old and new batteries, as this may damage the remote
control.
y The remote control will not be included for all sales market.
Make sure to point the remote control toward the remote control
sensor on the TV.
(Power) Turns the TV on or off.
Selects Radio, TV and DTV programme.
Recalls your preferred subtitle in digital mode.
Turns the PIP mode on or off. (Depending on model)
Audio descriptions function will be enabled.
Selects TV or PC mode.
(Inputs) Changes the input source.
ends to the label inside the
A
B