Abocom BSR202 Quick Start Manual

1—Check the package contents
Unpack the Bluetooth Stereo Receiver and
check that the following items are included:
Bluetooth Stereo USB Cable
Receiver
Quick Guide Power Adapter
2—Charge the battery
The battery lasts eight hours and is re-
charged using the power adapter or the
USB cable. To recharge:
Plug the USB cable into the DC jack on
the Bluetooth Stereo Receiver and connect
the other end to your PC.
or
Plug the power adapter into the DC jack
on the Bluetooth Stereo Receiver and con-
nect the other end to an electrical outlet.
Recharging takes 90 minutes.
3—Turn on the power
To turn on the power, press and hold the
power until the power LED lights blue.
To turn off the power, press and hold the
power button until the power LED turns off.
Power button
Volume +/-
Play
Mute on/off
Line-out jack
Earphone jack
Blue LED power is on
Blue fl ashing LED connected to device
Red LED battery is charging, turns off when
charged
Red fl ashing LED battery is low, recharge
before LED turns off
4—Pair (make connection) with receiver
The Bluetooth Stereo Receiver can be used
with a bluetooth transmitter or Bluetooth
Audio Dongle. On fi rst use, the devices must
be paired.
To pair the devices.
1. Connect your receiver to an audio device.
2. Turn on the power on your Bluetooth
Stereo Receiver.
3. Turn on the power on the transmitter.
DC jack
Power/
Batter LED