Page 1
R R e e f f r r i i g g e e r r a a t t i i o o n n a a t t i i t t s s b b e e s s t t Installation and Operation Instructions Griddlestand Refrigerators &...
Page 2
Your Warranty Registration information is located on the next page of this manual. Please ● ● complete the card and submit it to Victory Refrigeration within 10 days of installation. Failure to properly register equipment can void the warranty. Victory Refrigeration reserves the right to change specifications and product design ●...
Page 3
The Seller warrants to the original purchaser, equipment manufactured by Seller to be free from defects in material and workmanship for which it is responsible. The Seller's obligation under this warranty shall be limited to replacing or repairing at Seller's option, without charge, F.O.B. Sellers factory, any part found to be defective and any labor and material expense incurred by Seller in repairing or replacing such part, such warranty to be limited to a period of one year from date of purchase or thirteen months from date of shipment from Seller's factory, whichever is earlier, provided terms of payment have been fully met.
Your new model is completely self-defrosting. Frost is automatically removed from concealed coil finned surfaces at predetermined intervals. All defrost condensate water is directed to a vaporizer and is disposed of automatically, no floor drain is required. A fan motor circulates cold air throughout the fresh food and freezer storage compartments.
Follow requirements of local health authorities. 1. Use a detergent-sanitizer or a mild detergent (neutral or mildly alkaline recommended for metal surfaces) followed by a sanitizing rinse solution. These chemicals are necessary to kill or deactivate the micro-organisms on the surface areas in contact with stored food. Choose these chemicals carefully.
Page 6
TROUBLESHOOTING & SERVICING REFRIGERATION SYSTEM PROBLEM 1. Condensing unit fails to start - no hum. 2. Condensing unit fails to start - hums, but trips on overload protector. 3. Condensing unit starts, but fails to switch off of “start” winding. 4.
Page 7
PROBLEM 7. Start capacitor open or shorted blown. 8. Run capacitor open, shorted or blown. 9. Relay defective or burned out. 10. Product zone temperature too high. 11. Suction line frosted or sweating. 12. Liquid line frosted or sweating. 13. Noisy condensing unit. POSSIBLE CAUSE 1.