Brookstone micro cd system User Manual page 12

LOCAT Programming CD and MP3 Play
This feature programs the order in which tracks are played. You may
program up to 64 CD tracks and 64 MP3 tracks.
1. With the CD or MP3 in Stop mode, press PGM on the remote
control. For CDs, 00 P--01 PRGM appears on the display.
For MP3s, 000 flashes on the display, and P--01 PRGM appears.
2. Press - FOLDER/ or + FOLDER/
track or MP3 folder.
3. Press PGM to confirm your selection. For CDs, 00 P--002 PRGM
appears on the display.
For MP3s, 000 flashes on the display and P--01 PRGM appears.
4. For MP3s, press - FOLDER/
the desired MP3 track. Press PGM to confirm your selection.
5. Repeat Steps 2-4 to program other tracks or folders for your
desired sequence.
6. Press ENTER to play your programmed sequence.
Note:
• After the last programmed track or folder is played, the CD or MP3
stops playing automatically. To replay the programmed sequence,
press PGM, then ENTER .
• To cancel programmed play, you can open the CD COMPARTMENT
DOOR or press HOME two times when you are in CD or
MP3 mode.
to locate the desired CD
or + FOLDER/ again to locate
25