How To Configure The Wi-Fi Repeater - Winstars WS-WN518 User Manual

How to configure the Wi-Fi Repeater

You can configure the Wi-Fi Repeater by connecting it with your
computer/laptop with enclosed RJ45 cable or wirelessly. We recommend
you to do it with wire.
A. Configure the Wi-Fi Repeater with RJ45 Cable
A1. Plug the Wi-Fi Repeater to a
wall socket. Connect your
computer / laptop with the Wi-Fi
Repeater with enclosed RJ45
Cable.
A2. Click the " Start " button (it
should be located at the lower-
left corner of your screen), then
click " Control Panel ". Click
" View Network Status and
Tasks ", and then click " Manage
Network Connections ". Right-
click " Local Area Network ",
then select " Properties ". When
the " Local Area Connection
Properties " window appears,
select "I nternet Protocol
Version 4 (TCP/IPv4) " and then
click " Properties ".
A3. Setting IP address manually:
Type IP address is
192.168.10.x ( x is from 2 to
254 ), and Subnet mask is
255.255.255.0 . Type the
Router's LAN IP address (the
default IP is 192.168.10.1 ) into
the Default gateway field.