File: MBA5-P22 V8 User Guide Version : V1.0 1 Background Description Date Version Author Auditor First parution 14/05/2019 V1.0 3/22 AXEM Technology 11 rue Auguste Perret, 94042 Créteil, FRANCE – info@axemtec.com – +33 (0)1 41 94 11 85 – www.axemtec.com...
2 Product introduction 2.1 Introduction The MBA5-P22 V8 PDA is a rugged IP65 mobile terminal designed for use in industrial environments (laundry, construction, logistics, railways, etc.). It runs on the Android 8.1 operating system. This industrial terminal is available with HF/NFC and/or a 1D/2D scanner. For ease of use, it is supplied with a gun.
File: MBA5-P22 V8 User Guide Version : V1.0 2.2 Precaution before using battery • Do not leave battery unused for long time, no matter it is in device or inventory. If battery has been used for 6 months already, it should be check for charging function or it should be disposed correctly.
File: MBA5-P22 V8 User Guide Version : V1.0 2.4 Notes Note 1: Using the incorrect type battery has danger of explosion. Please dispose the used battery according to instructions. Note 2: Due to the used enclosure material, the product shall only be connected to a USB Interface of version 2.0 or higher.
File: MBA5-P22 V8 User Guide Version : V1.0 3 Installation instructions 3.1 Appearance 3.2 Install Micro SD and SIM cards The cards sockets are showing as follows: 3.3 Battery Charging By using USB Type-C contact, the original adaptor should be used for charging the device. Make sure not to use other adaptors to charge the device.
File: MBA5-P22 V8 User Guide Version : V1.0 3.4 Buttons and Function Area Buttons instructions Power Located on left side, press to ON/OFF device. Located on left side, its function can be defined by Function key Side button software. Scanning button located on both sides. There are SCAN button two scanning buttons.
File: MBA5-P22 V8 User Guide Version : V1.0 4 Call function 4.1 Calling numbers 1. Click icon 2. Click number key to input phone numbers. 3. Click icon to call. 4. Click icon to end call. 4.2 Contacts 1. Click contacts to open contacts list.
File: MBA5-P22 V8 User Guide Version : V1.0 5 Barcode reader-writer 1. In App Center, open 2D barcode scan test. 2. Press “SCAN” button or pull the trigger. The parameter “Auto interval” can be adjusted. 10/22 AXEM Technology 11 rue Auguste Perret, 94042 Créteil, FRANCE – info@axemtec.com – +33 (0)1 41 94 11 85 – www.axemtec.com...
Page 11
File: MBA5-P22 V8 User Guide Version : V1.0 Caution: Please scan codes in correct way otherwise the scanning will be failed. 1D barcode: 2D barcode: Max. radiant power: 0.6mW Wave length: 655nm IEC 60825-1 (Ed.2.0). 21CFR 1040.10 and 1040.11 standard.
File: MBA5-P22 V8 User Guide Version : V1.0 6 NFC RFID reader 6.1 Read functionality 1. Click App Center, open “NFC” to read tag information. 2. Place the tag you want to read in front of the RFID antenna as shown below: 3.
File: MBA5-P22 V8 User Guide Version : V1.0 6.2 Write functionality The storage of one tag has 4 zones: RESERVED, EPC, TID and USER. Normally, the default password is 00000000. And TID zone can only be read, other zones can be read and written.
File: MBA5-P22 V8 User Guide Version : V1.0 7 Other functions Bluetooth 1. Open “BT Printer” in App Center. 2. In the list of detected devices, click the device that you want to pair. 3. Select printer and click “Print” to start printing contents.
File: MBA5-P22 V8 User Guide Version : V1.0 7.2 GPS 1. Click “GPS” in App Center to open GPS test. 2. Setup GPS parameters to access GPS information. 15/22 AXEM Technology 11 rue Auguste Perret, 94042 Créteil, FRANCE – info@axemtec.com – +33 (0)1 41 94 11 85 – www.axemtec.com...
File: MBA5-P22 V8 User Guide Version : V1.0 7.4 Sensor 1. Click “Sensor” in App Center. 2. Setup the sensor by requirements. 17/22 AXEM Technology 11 rue Auguste Perret, 94042 Créteil, FRANCE – info@axemtec.com – +33 (0)1 41 94 11 85 – www.axemtec.com...
File: MBA5-P22 V8 User Guide Version : V1.0 7.5 Keyboard 1. Click “Keyboard” in App Center. 2. Setup and test the main value of the device. 18/22 AXEM Technology 11 rue Auguste Perret, 94042 Créteil, FRANCE – info@axemtec.com – +33 (0)1 41 94 11 85 – www.axemtec.com...
File: MBA5-P22 V8 User Guide Version : V1.0 7.6 Network 1. Click “Network” in App Center. 2. Test WIFI/Mobile signal by requirements. 19/22 AXEM Technology 11 rue Auguste Perret, 94042 Créteil, FRANCE – info@axemtec.com – +33 (0)1 41 94 11 85 – www.axemtec.com...
File: MBA5-P22 V8 User Guide Version : V1.0 7.7 Infrared read-write function (option) 1. Open infrared function in App Center. 2. Click button “Open” to start infrared scanning function. Click “LED” for infrared scanning aim assist. Depending on different application status to compile different commands to realize infrared read and write function.
File: MBA5-P22 V8 User Guide Version : V1.0 8 Device characteristics 8.1 General characteristics 8.2 User environment 8.3 Communication 8.4 Data collection 8.4.1 Barcode Scanning 8.4.2 RFID NFC 21/22 AXEM Technology 11 rue Auguste Perret, 94042 Créteil, FRANCE – info@axemtec.com – +33 (0)1 41 94 11 85 – www.axemtec.com...
Need help?
Do you have a question about the MBA5-P22 and is the answer not in the manual?
Questions and answers