Inserting And Removing The Battery/The Card (Optional) - Panasonic LUMIX DMC-LX100 Operating Instructions For Advanced Features

Inserting and removing the battery/the card (optional)

• Make sure that the camera is turned off.
1
Slide the release lever to the
[OPEN] position and open the
card/battery door
2
Insert the battery and card,
making sure that their
orientation is correct
• Battery:
Insert the battery all the way firmly until
a locking sound is heard, and check that
the lever is hooked over the battery.
• Card:
Insert the card all the way firmly until it
clicks.
3
Close the card/battery door and
slide the release lever to the
[LOCK] position
■
To remove
• To remove battery:
Move lever in direction of arrow.
●
Remove battery from camera after use.
●
Keep the Memory Card out of reach of children to prevent swallowing.
●
To remove the card or battery, turn the camera off and wait until the LUMIX indicator on the
monitor turns off. (Failure to wait may cause the camera to malfunction and may damage the card
or recorded data.)
24
• To remove card:
Lever
[OPEN] [LOCK]
Release lever
Charged battery (check orientation)
Card
(check orientation:
terminals face monitor)
Press the centre of the card.
Preparations
Lever
Do not touch
the terminal
SQW0038