Denver BTE-110 Instruction Manual

Bluetooth earbuds

BTE-110 Bluetooth Earbuds Instruction Manual

** Please read all instructions prior to usink the device.

Bluetooth power ON/OFF:

Power on: Press and hold the multifunctional button for 3 seconds until the LED flashes blue

3 times.

Power off: Press and hold the multifunctional button for 3 seconds to power off.

If the LED Indicator turns form BLUE to RED when in standby mode, turn the device off to

conserve power.

A. Press and hold the multifunctional button for 6 seconds.

The LED Indicator flashes BLUE & RED to indicate pairing mode.

B. Activate the Bluetooth function on your mobile device and select BTE-110 to pair. The

mobile device indicates if pairing has been successful.

Press the multifunctional button to answer an incoming call.

Ring off the call:

Press the multi-function button to hang up an active call.

Call back:

Table of Contents

Do you have a question about the BTE-110 and is the answer not in the manual?

Page 1 A. Press and hold the multifunctional button for 6 seconds. The LED Indicator flashes BLUE & RED to indicate pairing mode. B. Activate the Bluetooth function on your mobile device and select BTE-110 to pair. The mobile device indicates if pairing has been successful.
Page 2 Press the multi-function button twice to redial the last caller’s number. Charging: Insert the micro-USB plug into the charging port and connect the opposite USB end to a computer or compatible AC wall adapter. The LED Indicator lights up RED while charging. The LED turns BLUE when the battery is full.
Page 3 Additional information is available at the technical department of your city. Hereby, Inter Sales A/S declares that the audio equipment type BTE-110 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: Please enter: www.denver-electronics.com...