Table of Contents
Advertisement
Sound adjustment (option)
Stereo/Dual reception
When a programme is selected, the sound infor-
mation for the station appears after the pro-
gramme number and station name disappear.
Broadcast
On Screen Display
Mono
MONO
Stereo
STEREO
Dual
DUAL I
Mono sound selection
In stereo reception if the stereo signal is weak,
you can switch to mono by pressing the I/II/
ton twice. In mono reception the depth of sound
is improved. To switch back to stereo, press the
I/II/
button twice again.
*
Language selection for dual language broad-
cast
If a programme received in two languages (dual
language), you can switch to
DUAL I+II
by pressing the I/II/
ly.
Clock
{
Clock
{
Offotime {
Onotime
{
Autoooff
{
(
) O}
{OOKOMENU
i
Setting the clock
1. Press the MENU button and then
ton to select the Time menu.
2. Press the
G G
button to select
G G
3. Press the
button and then
adjust the hour.
4. Press the
G G
button and then
adjust the minute.
5. Press the OK button.
6. Repeatedly press the MENU button to return to
normal TV viewing.
Setting the On/Off timer
By using this function, the set automatically
switches on or off at a preset time. You must set
the time correctly before using on/off time func-
tion.
1. Press the MENU button and then
ton to select the Time menu.
G G
2. Press the
button and then
select
Off time
/
On time
3. Press the
G G
button and then
adjust the hour.
4. Press the
G G
button and then
14
DUAL I
(option)
the loudspeakers.
DUAL II
guage to the loudspeakers.
DUAL I+II
loudspeaker.
NICAM reception (option)
If your set is equipped with the receiver for NICAM
reception, the high quality NICAM (Near
Instantaneous Companding Audio Multiplex) digi-
tal sound can be received.
Sound output can be selected according to the
type of received broadcast as follows by pressing
the I/II/
*
but-
1. When NICAM mono is received, you can
2. When NICAM stereo is received, you can
3. When NICAM dual is received, you can select
DUAL I
,
DUAL II
or
button repeated-
*
Time Setting
-i-o:o-i-
5. Only
6. Press the OK button.
7. Repeatedly press the MENU button to return to
Note :
a.
b. To view the remaining on/off time, select the
but-
D D
E E
/
c. When you switch the main power off, the
Clock
.
D D
E E
button to
/
d. Two hours after the set is switched on by the
button to
D D
E E
/
Auto off
If you select
the set will automatically switch itself to standby
mode approximately ten minutes after a TV sta-
tion stops broadcasting.
1. Press the MENU button and then
2. Press the
D D
E E
but-
/
3. Press the
D D
E E
button to
/
.
button to
D D
E E
/
4. Press the OK or
5. Repeatedly press the MENU button to return to
button to
D D
E E
/
sends the primary broadcast language to
sends the secondary broadcast lan-
sends a separate language to each
*
button repeatedly.
select
NICAM MONO
or FM MONO.
select
NICAM STEREO
or FM MONO. If the
stereo signal is weak, switch to FM mono.
NICAM DUAL I
,
NICAM DUAL II
NICAM DUAL I+II
or
MONO
mono is selected the display
on the screen.
adjust the minute.
On time
function; Press the
and then
D D
E E
button to adjust programme
/
number and volume level.
normal TV viewing.
On time
works only in standby mode.
Time menu.
Clock
is reset .
on time function it will automatically switch
back to standby mode unless a button has
been pressed.
On
on the
Auto off
ton to select the Time menu.
G G
button and then
select
Auto off
.
G G
button and then
select
On
or
Off
on the
Auto off
menu.
F F
button.
normal TV viewing.
or
. When FM
MONO
appears
G G
button
pull-down menu,
but-
D D
/
E E
button to
D D
/
E E
D D
E E
button to
/
pull-down
Advertisement
Table of Contents
