Page EN-14
Operation
Clean the smoothie cup
and blade assembly before
the blended ingredients can so-
lidify. For this, see „Cleaning and
maintenance" on page EN-15.
Using the drinks bottle
WARNING
Risk of injury!
The drinks bottle is not leak-
proof. Leaking – hot – liquids
could cause scalding or stains.
Add up to 600 ml of liquid.
■
Use the drinks bottle in the
■
upright position only.
Do not put hot liquids into
■
the drinks bottle.
Adding liquids:
1. Unscrew the lid (12).
2. Add up to 600 ml.
3. Put the lid back on and tighten
it.
4. Place the closing device (10)
onto the lid opening and firmly
press it down.
5. Put the metal loop (11) over
the closing device or use it to
hang the drinks bottle.
Drinking:
1. Flip open the metal loop (11) if
necessary.
2. Flip up the closing device (10).