1. Manuals
  2. Brands
  3. Rivers Edge Treestands Manuals
  4. Sports & Outdoors
  5. RELAX WIDE RE664
  6. Operator's manual

Rivers Edge Treestands RELAX WIDE RE664 Operator's Manual

Ladder stand
Hide thumbs
Table of Contents

Advertisement

Quick Links

WE ARE HUNTERS
PRODUCT MEETS
INDUSTRY STANDARDS
RECOGNIZED BY
PARTICIPATING MEMBER
Get parts online at
www.HuntRiversEdge.com
Operator's Manual
RELAX
WIDE
™
Ladder Stand
MODEL RE664
Maximum Height
16' 9" to shooting rail
Maximum Field Rating
300 lbs
Tree Diameter Range
12" to 20"
Wear Your Harness!
© 2019 RETI
P/N: 31975
All Rights Reserved
REV3: 2/18/19

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RELAX WIDE RE664 and is the answer not in the manual?

Questions and answers

Related Manuals for Rivers Edge Treestands RELAX WIDE RE664

Summary of Contents for Rivers Edge Treestands RELAX WIDE RE664

  • Page 1 Operator's Manual RELAX WIDE ™ WE ARE HUNTERS Ladder Stand MODEL RE664 Maximum Height 16' 9" to shooting rail Maximum Field Rating 300 lbs Tree Diameter Range 12" to 20" Wear Your Harness! PRODUCT MEETS INDUSTRY STANDARDS RECOGNIZED BY Get parts online at ©...

  • Page 2: Table Of Contents

    Operator's Manual RELAX WIDE Ladder Stand INTRODUCTION Rivers Edge® Treestands are engineered with you the hunter in mind. We appreciate your purchase of one of our world class treestands. Follow these few simple instructions and your stand will provide you many years of trouble-free pleasure.

  • Page 3: Warnings

    Operator's Manual RELAX WIDE Ladder Stand READ AND UNDERSTAND THE FOLLOWING WARNINGS BEFORE ASSEMBLY STOP MODEL RE664 WARNING MAXIMUM USE HEIGHT - 16' 9" TO SHOOTING RAIL Never jump or bounce on a treestand to seat it to the tree. MAXIMUM OCCUPANCY - ONE (1) PERSON Pull up a bow, backpack, or firearm or other equipment only after being secure in the treestand and a firearm...

  • Page 4: Inspection And Maintenance

    Operator's Manual RELAX WIDE Ladder Stand WARNING INSPECTION AND MAINTENANCE Always lean forward as you climb and attach your harness to the tree before securing the platform to the tree and BEFORE EACH USE PERFORM THE FOLLOWING: stepping onto the platform. Never exceed the stated maximum use height.

  • Page 5: Hardware Identification Chart

    Bolts shown are for size reference. HARDWARE IDENTIFICATION CHART Extra hardware may be included in the parts bag. Quick Tip: Cut page out to use as a reference tool while following assembly instructions 1/4-20 X 1-1/4 IN Bolt - Qty 2 1/4-20 X 1-1/2 IN Bolt - Qty 6 1/4-20 Nut M6 Yellow Washer...

  • Page 7: Assembly Instructions

    Operator's Manual RELAX WIDE Ladder Stand ASSEMBLY INSTRUCTIONS IMPORTANT ASSEMBLY TIP: All assembly must be done in this order at ground Do not tighten any nut and bolt combinations completely level before uprighting. until all parts are assembled together! Finger tighten plus one turn of a wrench only! This will temporarily hold the Do not remove labels/warnings from product, they are locknut on the bolt while helping alignment of all parts!
  • Page 8 Operator's Manual RELAX WIDE Ladder Stand Mesh hidden for clarity 4. Attach the ends with two holes of the upper ladder support tubes (1) to the bottom side of main side rails (2) using four 1/4-20 x 2-1/4 IN bolts (19) and locknuts (22). SEE FIGURE 3.
  • Page 9 Operator's Manual RELAX WIDE Ladder Stand 9. Insert the shooting rail J-pipes (15) into the shooting rail rim (9). Secure together using two 1/4-20 x 1-1/4 IN bolts (18) and locknuts (22). You must now tighten all nut and bolts of the upper ladder stand assembly. Be sure not to over tighten or crush tubing when tightening! SEE FIGURE 5.
  • Page 10 Operator's Manual RELAX WIDE Ladder Stand 14. Attach the removable shooting rail by sliding it onto the posts. SEE FIGURE 7. Lubrication is recommended to prevent binding and noise. 15. Attach the two provided 9 IN armrest pads (28) and one 18 IN shooting rail pad (29) by wrapping around tubing and attaching hook and loop attachment strips together.
  • Page 11 Operator's Manual RELAX WIDE Ladder Stand 18. Attach the stabilizer bar extension tube (12) to the second ladder section mounting bracket using one provided spring lock pin (23). SEE FIGURE 9. 19. Slide the stabilizer bar (3) into the extension tube (12) and attach the two pieces together using one provided spring lock pin (23).

  • Page 12: Warnings

    Operator's Manual RELAX WIDE Ladder Stand READ AND UNDERSTAND THE FOLLOWING WARNINGS BEFORE SETUP AND USE STOP WARNING WARNING Double check assembly steps to be certain you have Bring ratchet strap(s) up with you in a pocket - Do Not correctly assembled this product.

  • Page 13: Setup And Use Instructions

    Operator's Manual RELAX WIDE Ladder Stand SETUP AND USE INSTRUCTIONS FIGURE 11 WARNING Never use a treestand on a dead, leaning, diseased or loose barked tree, or a utility pole. Always avoid electrical power lines. Bring ratchet strap(s) up with you in a pocket - Do Not carry in your hands! During installation and removal of ladder treestands, you must always and properly use the included Full Body Harness (Fall Arrest...
  • Page 14 Operator's Manual RELAX WIDE Ladder Stand 5. a. Loop the D-loop end of the two 16' criss cross straps (26) through the loop end to form a cinch knot around the ladder rail tube. Secure beneath a step rung, at the stabilizer bar height location.

  • Page 15: Finished Ladder

    Operator's Manual RELAX WIDE Ladder Stand FINISHED LADDER ASSEMBLED RATCHET STRAP PLATFORM SECTION CRISS CROSS STRAPS TOP LADDER SECTION STABILIZER BAR CAM STRAP MIDDLE LADDER SECTION STABILIZER BAR BOTTOM LADDER SECTION LOCKPINS Check for parts online at www.HuntRiversEdge.com or call 800-450-EDGE (3343) M-F 8-5...

  • Page 16: Illustrated Parts Breakdown

    Operator's Manual RELAX WIDE Ladder Stand ILLUSTRATED PARTS BREAKDOWN 19 20 Check for parts online at www.HuntRiversEdge.com or call 800-450-EDGE (3343) M-F 8-5...
  • Page 17 Operator's Manual RELAX WIDE Ladder Stand PARTS LIST ITEM # PART # DESCRIPTION QTY. ITEM # PART # DESCRIPTION QTY. BRACE UPPER LADDER 48240B BOLT 1/4-20 X 1 1/2 IN 31873 SUPPORT 8909B BOLT 1/4-20 X 1-1/4 IN 31938 LADDER SIDE RAIL 48271B BOLT 1/4-20 X 2-1/4 IN 27397...
  • Page 18 Operator's Manual RELAX WIDE Ladder Stand NOTES: Check for parts online at www.HuntRiversEdge.com or call 800-450-EDGE (3343) M-F 8-5...
  • Page 19 Operator's Manual RELAX WIDE Ladder Stand OTHER GREAT PRODUCTS BY RIVERS EDGE TREESTANDS Portable ground blinds take a beating from the sun, wind, rain and snow. Col- ors fade, materials rot, poles break and fabric tears. The Landmark Permanent Blind was designed and constructed to resist the elements year after year. The durable steel frame is covered in marine-grade reinforced synthetic tarpaulin, made from the same rugged materials used in pick-up truck tonneau covers.
  • Page 20 WE ARE HUNTERS Rivers Edge® Treestands, Inc. Phone: 800-450-EDGE (3343) 1160 Eighth Avenue, PO Box 755 Fax: 715-822-2124 Cumberland, WI 54829 www.HuntRiversEdge.com *All weights, specifications and features are approximate and are subject to change without notice. Due to continuous product improvements, product images may not be exact. Warning labels in some product images may have been removed for photography purposes only.

Table of Contents