Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Bosch SMS2ITI06Z
Summary of Contents for Bosch SMS2ITI06Z
- Page 1 Dishwasher SMS2ITI06Z [en] User manual...
-
Page 2: Table Of Contents
Table of contents Safety .......... 4 Before using for the first time .. 21 General information...... 4 Performing the initial configura- tion.......... 21 Intended use........ 4 Restriction on user group.... 4 Water softening system.... 22 Safe installation ........ 5 Overview of water hardness set- Safe use ........... 6 tings.......... 22 Damaged appliance ...... 8... - Page 3 Basic settings........ 32 Technical specifications.... 54 Overview of basic settings ..... 32 Information regarding Free and Open Source Software .... 55 Changing basic settings.... 33 Home Connect ...... 33 Home Connect quick start ..... 34 Home Connect settings.... 34 Remote Start ....... 34 Remote Diagnostics ...... 35 Software update ...... 35 Data protection....... 35 Declaration of Conformity.... 35...
-
Page 4: Safety
en Safety Safety Please read the safety information to ensure that you use the ap- pliance safely. General information You can find general information for this instruction manual here. ¡ Read this instruction manual carefully. Only this will ensure you use the appliance safely and efficiently. ¡... -
Page 5: Safe Installation
Safety en Keep children under the age of 8 years away from the appliance and power cable. Safe installation Follow these safety instructions when installing the appliance. WARNING ‒ Risk of injury! Improper installation may cause injury. ▶ When installing and connecting the appliance, follow the in- structions in the manual and installation instructions. -
Page 6: Safe Use
en Safety WARNING ‒ Risk of fire! It is dangerous to use an extended power cord and non-ap- proved adapters. ▶ Do not use extension cables or multiple socket strips. ▶ If the power cord is too short, contact Customer Service. ▶ Only use adapters approved by the manufacturer. WARNING ‒ Risk of burns! If the appliance is not installed properly, this may result in burns. - Page 7 Safety en WARNING ‒ Risk of injury! ¡ Leaving the appliance door open may result in injury. ▶ Only open the appliance door to load or unload tableware in order to prevent accidents, e.g. through tripping. ▶ Do not sit or stand on the appliance door when open. ¡...
-
Page 8: Damaged Appliance
en Safety Damaged appliance Follow the safety instructions if the appliance is damaged. WARNING ‒ Risk of electric shock! ¡ If the appliance or the power cord is damaged, this is danger- ous. ▶ Never operate a damaged appliance. ▶ Never operate an appliance with a cracked or fractured sur- face. - Page 9 Safety en WARNING ‒ Risk of harm to health! Children can lock themselves in the appliance, thereby putting their lives at risk. ▶ With redundant appliances, unplug the power cord. Then cut through the cord and damage the lock on the appliance door beyond repair so that the appliance door will no longer close.
-
Page 10: Preventing Material Damage
en Preventing material damage ¡ Modified or damaged water hoses Preventing material damage Preventing material dam- may result in material damage and damage to the appliance. Never kink, crush, modify or cut ▶ through water hoses. Follow these instructions to prevent Preventing material damage Only use the water hoses sup- material damage to your appliance,... -
Page 11: Environmental Protection And Saving Energy
Environmental protection and saving energy en ¡ Unsuitable cleaning agents may AquaSensor damage the appliance. The AquaSensor is an optical meas- Do not use a steam cleaner. ▶ uring device (light barrier) which So as not to scratch the finish ▶ measures the turbidity of the rinsing on the appliance, do not use water. -
Page 12: Installing And Connecting The Appliance
en Installation and connection ¡ Warranty Drainage connection ¡ Installation material Connect your appliance to drainage ¡ Mains cable connection so dirty water is dis- ¡ Quick reference guide charged via the wash cycle. Installing and connecting the Installing the drainage connection appliance Consult the installation instructions supplied for the steps required... -
Page 13: Electrical Connection
Installation and connection en Electrical connection Connect your appliance to the power supply. Connecting the appliance to the electricity supply Notes ¡ Follow the "Safety instructions" → Page 5. ¡ Connect the appliance to alternat- ing current only, in the range of 220 - 240 V and 50 Hz or 60 Hz. ¡... -
Page 14: Familiarising Yourself With Your Appliance
en Familiarising yourself with your appliance Familiarising yourself with your appliance Familiarising yourself with your appliance Familiarise yourself with the parts of your appliance. Familiarising yourself with your appliance Appliance You can find an overview of the parts of your appliance here. Rating plate Rating plate with "E number and FD number"... -
Page 15: Controls
Familiarising yourself with your appliance en "Detergent" → Page 25 is added to the detergent Detergent dispenser dispenser. "Bottom basket" → Page 20 Bottom basket Dispenser for special salt Add the special salt to the dispenser for special salt. → "Water softening system", Page 22 Lower spray arm The lower spray arm washes the tableware in the bot- tom basket. - Page 16 en Familiarising yourself with your appliance 3 4 5 6 7 8 9 "Switching on the appliance" → Page 29 ON/OFF button and reset button "Switching off the appliance" → Page 31 "Terminating the programme" → Page 31 "Programmes" → Page 17 Programme button "Water softening system" → Page 22 Special salt refill indicator "Rinse aid system"...
-
Page 17: Programmes
Programmes en Programmes Programmes You can find an overview of the pro- ted. The running time will change if Programmes grammes that can be selected here. the rinse aid system is switched off Different programmes, which can be or rinse aid needs to be added. found on the control panel of your The consumption values can be appliance, are available depending... -
Page 18: Information For Test Institutes
en Additional functions Programme Programme sequence Additional func- tions Tableware: Time-optimised: ExtraDry → "Additional ¡ Cleaning mixed table- ¡ Cleaning 65 °C Express 65° - 1h ware and cutlery. functions", ¡ Intermediate rinse Level of soiling: Page 18 ¡ Final rinse 69 °C ¡ Removing common ¡... -
Page 19: Features
Features en Adjusting top basket with pairs of Additional func- rollers tion To wash large items of tableware in ¡ For a better drying res- the baskets, adjust the shelf position ult the final rinse tem- ExtraDry of the top basket. perature is increased and the drying phase Pull out the top basket. -
Page 20: Bottom Basket
en Features Bottom basket Cutlery basket Arrange pans and plates in the bot- Arrange cutlery in the cutlery basket, tom basket. always without sorting it and with the sharp points downwards. Cutlery basket Large plates up to a diameter of Folding prongs 31 cm can be arranged in the bottom basket as shown. -
Page 21: Basket Heights
Before using for the first time en Push the lever forwards and fold To use the prongs again, fold them down the prongs . back up. a The prongs audibly click into posi- tion. Basket heights Set the baskets at the right height. Appliance height 81.5 cm with cutlery basket Setting Top basket... -
Page 22: Water Softening System
en Water softening system To ensure good dishwashing results, Water softening system Water softening system you can treat the water with special salt and the water softening system. Hard water leaves limescale on the Water softening system To avoid damage to the appliance, tableware as well as the washing water with a hardness above 9 °E tank and parts of the appliance may... -
Page 23: Switching Off The Water Softening System
Water softening system en ter hardness: the higher the water Place the lid back on the dis- hardness, the greater the amount of penser and turn to close. special salt required. Switching off the water ATTENTION! softening system ¡ Detergent may damage the water softening system. -
Page 24: Rinse Aid System
en Rinse aid system Spilled rinse aid can cause ex- Rinse aid system Rinse aid system cessive frothing during the wash cycle. You can use the rinse aid system Rinse aid system Close the lid of the dispenser for and rinse aid to get tableware and rinse aid. -
Page 25: Detergent
Detergent en Press . Detergent Description To open the basic settings, press Tabs Tabs are suitable for all for 3 seconds. cleaning functions and do a The display shows Hxx. not need to be measured a The display shows . out. -
Page 26: Unsuitable Detergents
en Detergent With powder and liquid detergent the Detergent Description dosage can be individually adjusted Detergent con- Chlorine residue on table- to the level of soiling of the table- taining chlorine ware may present a risk to ware. health. For better washing and drying results and to avoid damage to the appli- Information on detergents ance, please additionally use "Spe-... -
Page 27: Tableware
Tableware en Add the detergent to the dry deter- Close the lid of the detergent dis- gent dispenser. penser. 50 ml 25 ml 15 ml a The lid clicks into position. If you are using tablets, one is a The detergent dispenser will open enough. -
Page 28: Damage To Glass And Tableware
en Tableware Damage to glass and table- Cause Recommendation ware The water temperat- Select a programme ure of the programme with lower temperat- Avoid damage to glass and table- is too high. ures. ware. After the programme has ended, take glass- Cause Recommendation ware and cutlery out... -
Page 29: Removing Tableware
Basic operation en To save resources, do not pre- Removing tableware rinse tableware under running wa- ter. WARNING Observe the following when arran- Risk of injury! ging tableware: Hot tableware can cause burns to the – Put heavily soiled tableware in skin. -
Page 30: Setting A Programme
en Basic operation Setting a programme Starting the programme To adjust the wash cycle to the soil- Press ▶ ing level of the tableware, select a a The programme has ended when suitable programme. the display shows "0h:00m". Press the programme button re- ▶... -
Page 31: Terminate Programme
Basic operation en few minutes and then close it. This will help prevent excess pressure building up in the appliance and stop the appliance door bursting open. Press . a The programme is saved and the appliance switches off. Press to resume the pro- gramme. -
Page 32: Basic Settings
en Basic settings Basic settings Basic settings You can configure the appliance to meet your needs. Basic settings Overview of basic settings The basic settings depend on the features of your appliance. Basic setting Display text Selection Description Water hardness H00 - H07 Set the water softening system to your water hardness. -
Page 33: Changing Basic Settings
Home Connect en Basic setting Display text Selection Description Remote Start rc0 - rc2 Activate or deactivate → "Remote Start ", Page 34. The following settings are possible: ¡ With the setting "rc0", the func- tion is permanently deactivated. ¡ With the setting "rc1", the func- tion can be selected via the button. -
Page 34: Home Connect Quick Start
en Home Connect With the help of the Home Connect Tips ¡ Please consult the documents sup- App scan the QR code. plied by Home Connect. ¡ Please also follow the instructions in the Home Connect app. Note: Please note the safety precau- tions in this instruction manual and make sure that they are also ob- served when operating the appliance via the Home Connect app. -
Page 35: Remote Diagnostics
You can use this function to update Declaration of Conformity the software of your appliance, e.g. for optimisation, troubleshooting or Robert Bosch Hausgeräte GmbH safety-relevant updating. hereby declares that the appliance The Home Connect app informs you with Home Connect functionality about available software updates. -
Page 36: Cleaning And Servicing
Dishwasher Care and Ma- ance to malfunction. To avoid such chine Cleaner for Dishwashers online faults and reduce odours, we recom- at https://www.bosch-home.com/ mend cleaning your appliance at reg- store or from customer service. ular intervals. Machine Care is a programme which... -
Page 37: Filter System
Cleaning and servicing en Phase Removal of Detergent Placement Food remnants and deposits Machine cleaner Detergent dispenser To ensure optimum cleaning perform- Remove any coarse soiling in the ance, the programme doses the de- interior with a damp cloth. tergents independently of each an- Clean the filters. - Page 38 en Cleaning and servicing Press the locking catches Cleaning filters gether and lift the coarse filter out Soiling in the dishwashing water may . block the filters. After each wash check the filters for residue. Turn the coarse filter anticlockwise and remove the filter system ...
-
Page 39: Cleaning Spray Arms
Cleaning and servicing en Cleaning spray arms Limescale and soiling in the dish- washing water may block the nozzles and bearings on the spray arms. Clean the spray arms regularly. Unscrew the upper spray arm and pull down to remove . Pull up the lower spray arm to re- move. -
Page 40: Troubleshooting
en Troubleshooting Troubleshooting Troubleshooting You can rectify minor faults on your appliance yourself. Read the troubleshoot- Troubleshooting ing information before contacting after-sales service. This will avoid unneces- sary costs. WARNING Risk of electric shock! Incorrect repairs are dangerous. Repairs to the appliance should only be carried out by trained specialist ▶... - Page 41 Troubleshooting en Fault Cause Troubleshooting E:32-00 will light up altern- Unscrew the water connection. ately or indicator for water Remove the filter from the supply supply lights up. hose Clean the filter. Re-insert the filter in the supply hose. Screw the water connection back Check the water connection for leaks.
-
Page 42: Washing Results
en Troubleshooting Fault Cause Troubleshooting E:90-01 will light up altern- Mains voltage is too low. This is not a fault on the appliance. ately. Contact an electrician. Have the mains voltage and elec- trical installation checked by an electrician. A different error code ap- A technical fault is present. - Page 43 Troubleshooting en Fault Cause Troubleshooting Tableware is not dry. Water collects in recesses of Position tableware at an angle ▶ the tableware or cutlery. where possible. The combined detergent Use rinse aid to improve drying per- used has a poor drying per- formance.
- Page 44 en Troubleshooting Fault Cause Troubleshooting Remnants of food on table- Tableware is placed too Arrange tableware with sufficient ware. close together or basket is space in between. overfilled. The spray jets must reach the sur- faces of the tableware. Avoid points of contact. Spray arm rotation is Arrange tableware so that it does ▶...
- Page 45 Troubleshooting en Fault Cause Troubleshooting Detergent residue in the ap- Tabs are used in the quick Select a more intensive "Pro- ▶ gramme" → Page 17 or use pliance or short programme. Dissolv- "Powder detergent" → Page 25. ing time of the tab is not at- tained.
- Page 46 en Troubleshooting Fault Cause Troubleshooting Stubborn white coatings are Too little detergent is being Increase the amount of detergent ▶ present on tableware, inside used. used or change "Detergent " → Page 25. the appliance or the door. Washing programme selec- Select a more intensive washing ▶...
- Page 47 Troubleshooting en Fault Cause Troubleshooting Coloured deposits (yellow, The formation of films is due Check the setting of the water orange, brown) that are easy to ingredients of food rem- softening system. to remove are present inside nants and tap water (limes- Add special salt.
- Page 48 en Troubleshooting Fault Cause Troubleshooting Irreversible clouding of Glasses are not dishwasher- Use dishwasher-proof glasses. ▶ glassware. proof, only suitable for dish- Glasses are usually only suitable for washers. use in a dishwasher, i.e. long-term wear or long-term changes must be expected.
-
Page 49: Home Connect Problem
Troubleshooting en Home Connect problem Fault Cause Troubleshooting Connection to home net- WLAN on router is not act- Check the wireless network con- ▶ work is not established. ive. nection of your router. WLAN display is flashing. Connection to home net- Activate the wireless network con- ▶... -
Page 50: Mechanical Damage
en Troubleshooting Fault Cause Troubleshooting Water is left in the appliance Programme has not yet Wait until the programme ends or ▶ at the end of the pro- ended. cancel the programme with Reset. gramme. → "Terminate programme", ▶ Page 31 Appliance cannot be Software update is taking Wait until the software update has ▶... -
Page 51: Noise
Troubleshooting en Fault Cause Troubleshooting Appliance door cannot be Door cannot be closed due Check whether the appliance has ▶ closed. to installation method. been installed properly. When closed, the appliance door, its decor or attached parts should not knock against adjacent cabin- ets or the worktop. -
Page 52: Clean Wastewater Pump
en Transportation, storage and disposal Insert the pump cover and press Clean wastewater pump down . Large remnants of food or foreign bodies can block the waste water pump. As soon as the rinsing water no longer drains properly, the waste water pump must be cleaned. -
Page 53: Protect Appliance From Frost
Customer Service en Protect appliance from frost Disposing of old appliance If there is a risk of frost where the ap- Valuable raw materials can be re- pliance will be standing, e.g. in a holi- used by recycling. day home, empty the appliance com- pletely. -
Page 54: Product Number (E-Nr.), Produc- Tion Number (Fd) And Consecut- Ive Numbering (Z-Nr.)
en Technical specifications We will always find an appropriate AQUA-STOP guarantee solution and try to avoid unnecessary In addition to warranty claims against visits being made by a Customer Ser- the seller under the purchase agree- vice technician. ment and in addition to our manufac- With any warranty claims, we will turer's warranty, we offer compensa- make sure that your appliance is re-... - Page 55 Technical specifications en documents). Alternatively, you can Power consumption Off mode/standby send a request to oss- mode: 0.50 W request@bshg.com or to BSH Haus- Left-on mode: 0.50 W geräte GmbH GmbH, Carl-Wery-Str. Networked standby: 34, D-81739 München, Germany. 2.00 W The source code will be made avail- Time in left-on mode: able to you on request.
- Page 56 Expert advice for your Bosch home appliances, help with problems or a repair from Bosch experts. Find out everything about the many ways Bosch can support you: www.bosch-home.com/service Contact data of all countries are listed in the attached service direct- ory.
Need help?
Do you have a question about the SMS2ITI06Z and is the answer not in the manual?
Questions and answers