Installing The Turbocharger; Fig. 16: Inserting The Gasket - ABB HT610059 Operation Manual

Operation Manual / A150-M58/68
3 Removing and Installing / 3.3 Installing the turbocharger
3.3

Installing the turbocharger

3.3.1 Inserting gaskets
CAUTION
Inserting the gaskets
Gaskets that are forgotten, damaged or improperly inserted will lead to oil
leaks.
Always use new gaskets and insert them carefully into the slot.
u
Fig. 16: Inserting the gasket
42001 Bearing casing
42200 O-ring
42195 O-ring
Detail A Screw plug with orifice hole (option)
Fit the gasket (42200) on the oil inlet (screw plug 01a or 01b with the orifice hole).
u
Fit the gasket (42195) on the oil drain (02).
u
© Copyright 2021 ABB. All rights reserved.
01a Oil inlet (possible variant)
01b Oil inlet (possible variant)
02 Oil drain
HZTL4041_EN Rev.E January 2021