The Power Plug And Slide; Figure 3-2: The Router's Power Plug And Slide - Cisco Linksys WTR54GS User Manual

Wireless-G Travel Router with SpeedBooster
Buttons
Reset There are two ways to reset the Router's factory defaults. Either press the Reset button,
for approximately eight seconds, or restore the defaults from the Administration tab -
Factory Defaults in the Router's Web-based Utility.
Secure Easy Setup The Secure Easy Setup sets up and configures your wireless devices. Push the Secure Easy
Setup button on the Router and on your other SecureEasySetup-enabled wireless devices
to automatically create a wireless connection.

The Power Plug and Slide

The Router's Power Plug is located on the back panel and the Power Slide is located on the top panel.
Power Plug The Power plug is where you will connect the Router to the electrical outlet.
Power Slide Slide the Power Slide button in one direction to release the power plug and the other
direction for it to return inside the Router.
Chapter 3: Getting to Know the Wireless-G Travel Router with SpeedBooster
The Power Plug and Slide
IMPORTANT: If you reset the Router, all of your
settings, including Internet connection, wireless, and
security, will be deleted and replaced with the factory
defaults. Do not reset the Router if you want to retain
these settings.
POWER PLUG
POWER SLIDE

Figure 3-2: The Router's Power Plug and Slide

7