C O N T E N T CONTENTS OPERATION SAFETY... TO CUSTOMERS... SAFETY & PRECAUTIONS... ACCESSORIES... FUNCTIONS... DIMENSIONS... PRODUCT SPECIFICATIONS... FEATURES... MULTI-MEDIA BOX... PRODUCT INSTALLATION... 1.Antenna Installation... 2.VGA Source Connection... 3.DVI Source Connection... 4.High Definition TV (HDTV)... 5.Speaker Jack(Audio Out)... 6.Power Connection...
OPERATION SAFETY Caution:To avoid fire and electric shocks, do not expose this product under damp or humid condition and make sure the plug is fully plugged in at all time. Warning:Never open the housing of the LCD display. When the housing is opened, there is a danger of injury from electric shock.There is no component that can be replaced by...
TO CUSTOMERS Thank you for purchasing this product. Please read through the instructions and follow the steps in order to achieve the maximum reliability. Please keep this manual handy and close to your LCD display after reading. SAFETY & PRECAUTIONS ◎Manual Guide--Please read through user's manual before operating this product.
Page 5
◎Do not insert any objects through the slots and openings of the LCD display.This may lead to an electrical short-circuit or even cause fire and results in damages to your LCD display ◎Repair--Please unplug the power cord and contact distributors or qualified repair personnels if any of the following situations have happened.
Page 6
◎Wall Mounting--Please use correct wall mount and follow instructions when installing the display onto the wall. ◎Cleaning--Unplug power cord beforehand.Please use dry and soft sponge to clean the screen surface.Do not use diluted acid. ◎Humidity--Keep this product away from moisture or high humidity area.
Page 7
◎Away from heat sources--Keep this product away from heat sources such as direct exposure to sunlight, heater and stove, etc.This would avoid structure distortion or machine break down. ◎When switched off, the LCD display can be stored comfortably between -4℉ to 140℉(-20℃ to 60℃) ◎Unplug from the socket outlet if the LCD Display is not intended to be used for a long period of time.
FUNCTIONS Auto-Adjustment:It helps users to adjust the display into appropriate setup. Contrast/Brightness:Users are able to adjust their custom setup. Color Adjustment:Users are able to adjust their custom color setup. Display Frequencies:Users can use this function to check current horizontal frequency,vertical frequency, phase and resolution.
D i m e n s i o n s 23"LCD-2300VT 7 2 0 27"LCD-2700VT 7 6 6 . 2 30"LCD-3018VT 9 8 7 . 2...
Page 11
D i m e n s i o n s Control Buttons(23".27".30") LCD-2300VT,LCD-2700VT,LCD-3018VT 89.9 (mm) 頻 道 音量 訊號 源 目 錄 V o l S o u r c e M e n u P o w e r 電源...
FEATURES Power Saving:Save more than 40% power compared with CRT TV No Radiation:No radiation wave from screen. No Flaring Picture:No flaring picture which may hurt users' eyes Thinner and lighter:space saving, better for decoration No Static Electricity:LCD panel does not create static electricity Excellent Sound Effects:High performance speakers...
2.VGA Source Connection: Please switch off PC and TV. Connect VGA cable to display's D-Sub connector, and connect the other head of cable to PC VGA Output 3.DVI Source Connection: Use DVI cable to connect with PC and TV You can use this display to play with a Video player, Video Camera, DVD Player, and TV Game consoles etc.
SOURCE INPUT CONNECTORS Multi-media box I N P U T 1 I N P U T 2 Connectors Description Video Input is using Video Jack(Yellow RCA Jack)or S-Video AV.S-Video In Jack. Audio Input is using White RCA Jack (Left) and Red RCA Input 1、Input 2 Jack (Right) The level of audio output cannot be changed using the volume,...
POWER ON/OFF 1.Press POWER button from key pad (or remote control),the red light will turn green.This means the TV has been switched on. The picture will takes about 3 seconds to show on the screen. 2.Press POWER button again to switch off the TV.
REMOTE CONTROL Power Source: Select source input Menu: Select from PICTURE PARAMETERS/AUDIO SETTING/PICTURE IN PICTURE/PARENTAL CONTROLS/GENERAL SETTINGS.Use(+)(-)to select desired program and press ENTER to proceed. Use to select function that need to be adjusted. VOL: (+)for volume up and (-)for volume down Use CH( channels Exit:...
(10)Mute: Switch On/Off sound off function (11)Sleep: Set timer to 30/60/120 min. (12)Display: To display the imformations at top right corner (13)Digit Buttons: Switch to favorite channel directly by entering the channel numbers (14)16:9: Switch to 4:3 or 16:9 display format (15)Freeze: Freeze the display image (16)Close Caption:...
PC (RGB) MODE IMPORTANT: 1.If PC picture interferences appeared while RGB and antenna are connecting to the display at the same time. This is possibly caused by PC and display both are using different number of plugging heads,such as 2 heads and 3 heads. Users are adviced to use the same number of plugging heads for both PC and display.
BASIC OPERATION Key Pad Source Menu POWER A:By using Key Pad B:Or Remote Control 1.Channel Selection Press Ch button to search channels 2.Direct Channel Selection Select favorite channels directly by pressing channel numbers. For example, Ch45. Press 4 and followed by 5 3.Antenna/Cable TV Setup Menu CHANNEL SETTINGS...
AUDIO SETTINGS Key Pad Source Menu POWER 1.Press Vol button, "-"for volume down and "+"for volume up. 2.Press MENU to display the main menu. Use to select audio settings. 3.Press to enter Audio Settings menu.Use Buttons to select (Bass/Treble/Balance/MTS/Mute) 4.Press buttons to perform adjustment.
PICTURE PARAMETERS PICTURE PARAMETERS PICTURE PARAMETERS BRIGHTNESS BRIGHTNESS BRIGHTNESS BRIGHTNESS BRIGHTNESS BRIGHTNESS CONTRAST CONTRAST CONTRAST SATURATION SATURATION SATURATION COLOR TEMP COLOR TEMP COLOR TEMP FLESHTONE FLESHTONE FLESHTONE SHARPNESS SHARPNESS SHARPNESS BL BRIGHTNESS 1.Press MENU 1.Press MENU 1.Press MENU button to display the main menu button to display the main menu button to display the main menu 2.Press Enter...
Page 24
PICTURE PARAMETERS PICTURE PARAMETERS PICTURE PARAMETERS SATURATION SATURATION SATURATION BRIGHTNESS BRIGHTNESS BRIGHTNESS CONTRAST CONTRAST CONTRAST SATURATION SATURATION SATURATION COLOR TEMP COLOR TEMP COLOR TEMP FLESHTONE FLESHTONE FLESHTONE SHARPNESS BL BRIGHTNESS 1.Press MENU 1.Press MENU 1.Press MENU button to display the main menu button to display the main menu button to display the main menu 2.Press Enter...
Page 25
PICTURE PARAMETERS PICTURE PARAMETERS PICTURE PARAMETERS FLESHTONE FLESHTONE FLESHTONE BRIGHTNESS BRIGHTNESS BRIGHTNESS CONTRAST CONTRAST CONTRAST SATURATION SATURATION SATURATION COLOR TEMP COLOR TEMP COLOR TEMP FLESHTONE FLESHTONE FLESHTONE SHARPNESS SHARPNESS SHARPNESS BL BRIGHTNESS 1.Press MENU 1.Press MENU 1.Press MENU button to display the main menu button to display the main menu button to display the main menu 2.Press Enter...
PC PARAMETERS PC PARAMETERS PC PARAMETERS AUTO AUTO AUTO AUTO AUTO AUTO CLOCK CLOCK CLOCK PHASE PHASE PHASE POSITION POSITION POSITION AUTO COLOR AUTO COLOR AUTO COLOR 1.Press MENU 1.Press MENU 1.Press MENU button to display the main menu button to display the main menu button to display the main menu 2.Press 2.Press...
Page 27
PC PARAMETERS PC PARAMETERS PC PARAMETERS PHASE PHASE PHASE AUTO AUTO AUTO CLOCK CLOCK CLOCK PHASE PHASE PHASE POSITION POSITION POSITION AUTO COLOR AUTO COLOR AUTO COLOR 1.Press MENU 1.Press MENU 1.Press MENU button to display the main menu button to display the main menu button to display the main menu 2.Press 2.Press...
PC PARAMETERS PC PARAMETERS AUTO COLOR AUTO COLOR AUTO COLOR AUTO AUTO AUTO CLOCK CLOCK CLOCK PHASE PHASE PHASE POSITION POSITION POSITION AUTO COLOR AUTO COLOR AUTO COLOR 1.Press MENU 1.Press MENU button to display the main menu button to display the main menu 2.Press 2.Press button to select(PC PARAMETERS) option...
PICTURE-IN-PICTURE PICTURE-IN-PICTURE PIP POSITION PIP POSITION PIP SIZE PIP SIZE SMALL SMALL PIP SOURCE PIP SOURCE LARGE LARGE 1.Press MENU 1.Press MENU button to display the main menu button to display the main menu 2.Press 2.Press button to select(PICTURE-IN- PICTURE) option button to select(PICTURE-IN- PICTURE) option 3.Press Enter 3.Press Enter...
Page 30
PICTURE-IN-PICTURE PIP POSITION PIP SOURCE PIP SIZE PIP SOURCE S-VIDEO1 S-VIDEO2 YCbCr HDTV 1.When the main screen is display under the VGA or HDTV mode either (DVI-S-video1/S-video2/AV1/AV2/YCbCr/TV)is selectable for sub-screen display. 2.(VGA and HDTV source are not viewable at the same time) 3.When the main screen is display under the DVI mode either...
Page 31
PICTURE SOURCE SETUP Picture source setup Main source VGA DVI YCbCr source YCbCr HDTV Remark: " " Represent a playable source " " Represent a non-playable source TV HDTV...
CHANNEL SETTINGS CHANNEL SETTINGS CHANNEL SETTINGS ANTENNA AND CABLE TV SELECTION ANTENNA AND CABLE TV SELECTION ANTENNA AND CABLE TV SELECTION SYSTEM SYSTEM SYSTEM CH EDIT CH EDIT CH EDIT ANTENNA ANTENNA ANTENNA CABLE CABLE CABLE 1.Press MENU button to display the main menu 2.Press button to select(CHANNEL SETTINGS) 3.Press Enter...
PARENTAL CONTROLS PARENTAL CONTROLS PARENTAL CONTROLS LOCK MENU LOCK MENU LOCK MENU MPAA RATING MPAA RATING MPAA RATING Please Enter the Password: Please Enter the Password: Please Enter the Password: TV PG RATING TV PG RATING TV PG RATING CODE CHANGE CODE CHANGE CODE CHANGE 1.Press MENU...
Page 34
GENERAL SETTINGS GENERAL SETTINGS LANGUAGE LANGUAGE OSD TIMEOUT OSD TIMEOUT ENGLISH ENGLISH LANGUAGE LANGUAGE SLEEP TIMER SLEEP TIMER 中 文 中 文 I/P INFO I/P INFO RESET RESET TRANSPARENCY TRANSPARENCY DEINTERLACE DEINTERLACE 1.Press MENU button to display the main menu 2.Press button to select(GENERAL SETTINGS) 3.Press Enter...
Page 35
GENERAL SETTINGS GENERAL SETTINGS GENERAL SETTINGS I/P INFO I/P INFO I/P INFO OSD TIMEOUT OSD TIMEOUT OSD TIMEOUT SOURCE SOURCE SOURCE LANGUAGE LANGUAGE LANGUAGE RESOLUTION RESOLUTION RESOLUTION 720x240 720x240 720x240 SLEEP TIMER SLEEP TIMER SLEEP TIMER I/P INFO I/P INFO I/P INFO 15KHZ 15KHZ...
Page 36
GENERAL SETTINGS GENERAL SETTINGS GENERAL SETTINGS TRANSPARENCY TRANSPARENCY TRANSPARENCY OSD TIMEOUT OSD TIMEOUT OSD TIMEOUT LANGUAGE LANGUAGE LANGUAGE SLEEP TIMER SLEEP TIMER SLEEP TIMER I/P INFO I/P INFO I/P INFO RESET RESET RESET TRANSPARENCY TRANSPARENCY TRANSPARENCY DEINTERLACE DEINTERLACE DEINTERLACE 1.Press MENU button to display the main menu 2.Press button to select(GENERAL SETTINGS)
Page 37
GENERAL SETTINGS DEINTERLACE 1.MADI(Motion Adaptire De-interlacing) Video processing with this de-interlacing,recommend in TV,AV and S-video mode. 2.Motion: Video processing in motion picture. Low: Exhibits very little fickering. Medium: Between low and high. High: Minimize or eliminate the feathering artifact.
Page 38
C.O.D. For repair and handling charges. For"In Warranty repairs" enclose a check or money order payable to the order of Tote Vision for the sum of $15.00 for return postage and handling.
Need help?
Do you have a question about the LCD-2300VT and is the answer not in the manual?
Questions and answers