Table of Contents
Advertisement
Additional Operation - VCR part
Video Doctor (Self-Diagnosis)
This feature informs you that there is a problem with your
DVD+VCR. These error messages will appear on the TV
screen.
1. Press i.
Press 1 1 or 2 2 to select
Press ENTER/OK.
1 2
Pr-12
P SET
SET
ACMS
SYS
R
f
OSD
OSD
ON
OFF
2. Press 3 3 or 4 4 to check a problem.
ANTENNA CONNECT
PLEASE CHECK:
O
Connect the aerial into the jack securely.
HEAD STATUS
PLEASE CLEAN:
O
Clean your video heads.
TAPE STATUS
NOT RECORDABLE:
O
Insert a tape with its protection tab in place
NO. OF TIMER PROGRAMME
2
O
Shows the number of timer recording.
NEXT TIMER PROGRAMME
PR-01 26 10:00~11:00 SP
O
Shows the current status of timer recording.
3. Press i to remove the menus from the TV screen.
Lock (Child Lock)
The control buttons on the front of the unit can be
switched off so that your unit can only be operated
using the remote control.
1. Press LOCK.
and SAFE will appear in the display window.
None of the buttons on the front of your unit will
work.
If any buttons on the front of your unit are pressed
SAFE will flicker in the display window for a few
seconds.
2. Press LOCK again to switch off the child lock.
OFF will appear in the display window.
.
ANTENNA CONNECT
HEAD STATUS
TAPE STATUS
NO. OF TIMER PROGRAMME
NEXT TIMER PROGRAMME
PLEASE CHECK
i
1W Mode (Power save Mode)
Set 1W ON/OFF to ON to place your DVD+VCR into an
economic power save mode.
Nothing is displayed in the display window.
1 Press i.
The main menu will appear on the TV screen.
F
G
Press
or
to select the 1W ON/OFF.
Press ENTER/OK.
2. Press
D
or
E
to select the ON.
3 Press i.
Note:
Some function may not be operated in the 1W Mode.
The 1W Mode is not available in the standby mode
•
for the timer recording.
25
Advertisement
Table of Contents
