Panasonic PT-TW350D Operating Instructions (Functional Manual) page 104

<COMPUTER 1
IN>
<COMPUTER 2
IN>
<MONITOR OUT>
Termi-
nals
<VIDEO IN>
<HDMI IN>
<AUDIO IN>
<VARIABLE
AUDIO OUT>
<USB A (VIEWER/
WIRELESS)>
<USB B
(DISPLAY)>
<SERIAL IN>
<LAN>
Power cable length
Cabinet
Dimensions
Weight
Noise level *
5
Operating
environment
Operating
temperature *
6
environ-
Operating
ment
environment
humidity
Power supply
Operating range
Remote
control
Weight
Dimensions
*4 This is an average value. It may differ depending on individual product.
*5 Measurement, measuring conditions and method of notation all comply with ISO/IEC 21118:2012 international standards.
*6 [Lamp control] will be switched to [
temperature is 35 °C to 40 °C.
[Lamp control] will be switched to [
environment temperature is 30 °C to 35 °C.
Note
f The part numbers of accessories and separately sold components are subject to change without notice.
104 - ENGLISH
Chapter 7 - Appendix - Specifications
1 (High-density D-sub 15 pin female)
[RGB signal] 0.7 V [p-p] 75 Ω
HD/SYNC TTL high impedance, automatic positive/negative polarity compatible
VD TTL high impedance, automatic positive/negative polarity compatible
(HD/SYNC and VD do not support 3 value SYNC.)
[YP P signal] Y: 1.0 V [p-p] including synchronization signal, P
B R
[Y/C signal] Y: 1.0 V [p-p] C: 0.286 V [p-p] 75 Ω S1 signal compatible
1 (High-density D-sub 15 pin female)
[RGB signal] 0.7 V [p-p] 75 Ω
HD/SYNC TTL high impedance, automatic positive/negative polarity compatible
VD TTL high impedance, automatic positive/negative polarity compatible
(HD/SYNC and VD do not support 3 value SYNC.)
1 (High-density D-sub 15 pin female)
[RGB signal] 0.7 V [p-p] 75 Ω
HD/SYNC TTL high impedance, positive/negative polarity compatible
VD TTL high impedance, positive/negative polarity compatible
1 (Pin jack 1.0 V [p-p] 75 Ω)
1 (HDMI 19 pin, HDCP and Deep color compatible)
Audio signals: Linear PCM (Sampling frequency: 48 kHz/44.1 kHz/32 kHz)
1 (M3 stereo mini jack, 0.5 V [rms], input impedance 22 kΩ and more)
1 (Pin jack x 2 (L-R), 0.5 V [rms], input impedance 22 kΩ and more)
1 (M3 stereo mini jack, stereo monitor output compatible,
0 V [rms] to 2.0 V [rms] variable, output impedance 2.2 kΩ and less)
USB connector (type A x 1, output DC 5 V, 500 mA maximum)
Memory Viewer / Wireless module (Model No.: ET-WML100) compatible
USB connector (type B x 1), only for USB Display
1 (D-sub 9 pin, RS-232C compliant, for computer control use)
1 (for RJ-45 network connection, PJLink compatible, 10Base-T/100Base-TX)
3.0 m (118-3/32")
Molded plastic
Width: 335 mm (13-3/16")
Height: 134.1 mm (5-9/32") (when adjustable feet shortened)
Depth: 329 mm (12-15/16")
Approx.3.9 kg (8.60 lbs.) *
4
When set to [ (Normal)] in [Lamp control] : 37 dB
When set to [ (Eco 1)] in [Lamp control] : 33 dB
When set to [ (Eco 2)] in [Lamp control] : 28 dB
5 °C (41 °F) to 40 °C (104 °F) (Elevation: below 1 400 m (4 593'); [High land]: [Off])
5 °C (41 °F) to 35 °C (95 °F) (Elevation: 1 400 m (4 593') ~ 2 700 m (8 858'); [High land]: [On 1])
5 °C (41 °F) to 30 °C (86 °F) (Elevation: 2 700 m (8 858') ~ 3 000 m (9 843'); [High land]: [On 2])
20 % to 80 % (no condensation)
DC 3 V (AAA/R03/LR03 battery x 2)
Approx. 5 m (16'4-13/16") (when operated directly in front of receptor)
63 g (2.22 ozs.) (including batteries)
Width : 44 mm (1-23/32"), Length : 105 mm (4-1/8"), Height :20.5 mm (13/16")
(Eco 1)] automatically when [High land] is set to [Off] and the operating environment
(Eco 1)] automatically when [High land] is set to [On 1] or [On 2] and the operating
P : 0.7 V [p-p] 75 Ω
B R