Connections to Your
TV
Make one of the following connections, depending
on the capabilities of your existing equipment.
,
Note
y Depending on your TV and other
equipment you wish to connect, there are
various ways you could connect the player.
Use only one of the connections described
in this manual.
y Please refer to the manuals of your TV,
Stereo System or other devices as necessary
to make the best connections.
>
Caution
y Make sure the unit is connected directly
to the TV. Tune the TV to the correct video
input channel
y Do not connect your player via your VCR.
The image could be distorted by the copy
protection system.
DH3120S-A2.DNGAFLW_ENG_0958.indd 13
Component Video Connection
Connect the COMPONENT VIDEO (PROGRESSIVE
SCAN) OUTPUT jacks on the unit to the
corresponding input jacks on the TV using Y P
cables.
You can hear the sound through the system's
speakers.
,
Note
If your TV accepts progressive format signals,
you must use this connection and set
[Progressive Scan] in [Display] setup to [On]
(See page 17).
Connecting
13
P
B
R
2
2013-04-08
4:04:00