Toshiba SD-P1900SR Owner's Manual page 72

Before calling service personnel (continued)
Symptom
The player does not start
playback.
Playback does not follow
the course of the disc's
program.
Buttons do not work.
The remote control does
not work properly.
72
Cause
• No disc is inserted.
• An unplayable disc is inserted.
• The disc is inserted upside down.
• The disc is not inserted securely.
• The disc is dirty.
• The parental lock function is set.
• The player is set to the external input
mode (AV-IN).
• It is in the repeat playback mode,
memory playback, etc.
• Power supply fl uctuations or other
abnormalities such as static electricity
may interrupt correct operation.
• The remote control is not pointed at
the remote sensor of the player.
• The remote control is too far from the
player.
• The batteries in the remote control are
exhausted.
• The player's remote sensor is exposed
to a strong light source such as direct
sunlight or other illumination.
Correction
• Insert a disc.
• Insert a playable disc. (Check the disc type, colour system and region
number.)
• Insert the disc with the playback side down.
• Insert the disc securely in the disc holder.
• Clean the disc.
• Cancel the parental lock function or change the parental lock level.
• To play a disc with the player, Normal needs to be set. Press MODE
repeatedly so that you can view playback picture.
• These operations may prevent a proper progression of the contents.
• Turn the power on or off with the POWER switch. Or disconnect the
power cord and insert it into the wall outlet again.
• Point the remote control at the remote sensor of the player.
• Operate the remote control within about 3 m (9.9 feet).
• Replace the batteries with new ones.
• Avoid the player from being exposed to a strong light source.