Table 40: Tightening Torque (72004) - ABB XAC22399 Operation Manual

Operation Manual / 4 Product description / A100-L
8 Disassembly and assembly / 8.21 Fitting the filter silencer
8.21.2 Fitting the filter silencer (welded)
If the turbocharger is also fitted with a noise package, observe the chapter on dismantling
the filter silencer with noise package.
Fig. 56: Fitting the filter silencer
Product
A165-L
A170-L
A175-L
A180-L
A185-L
A190-L
Table 40: Tightening torque (72004)
1. Attach lifting gear to the eyelets of the filter silencer (81000).
2. Position filter silencer on compressor casing.
3. Fit nuts (72004) with washers (72003) and tighten.
Fit insulation as far as necessary.
u
© Copyright 2020 ABB. All rights reserved.
Size
M14
M16
M18
M20
M22
M24
HZTL4034_EN
Tightening torque [Nm]
130
200
300
420
570
710
Rev.Q July 2020